97113-0U000 Blower Motor for HYUNDAI Verna
Primary OE reference: 97113-0U000
Cross-reference 1: 97113-F9000
Cross-reference 2: 1017028767
Cross-reference 3: 1017016542
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HYUNDAI Verna
Brand: HYUNDAI
Model: Verna
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
97113-0U000 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 97113-0U000 together with the 97113-0U000 product images and vehicle data on this page.
For catalogue item 6202-008, the 97113-0U000 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6202-008 when comparing this 97113-0U000 airflow configuration.
OE Reference and Application
The primary catalogue number is 97113-0U000. The recorded application is HYUNDAI Verna. For 6202-008, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6202-008 with the approved OE reference.
HVAC Interface and 97113-0U000 installation
During work on 6202-008, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6202-008 before the lower trim is closed.
For item 6202-008, confirm that the 97113-0U000 centrifugal wheel clears its housing and that the 6202-008 connector lock engages without force. After seating 6202-008, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-008.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 97113-0U000 |
| Cross-reference numbers | 97113-F9000 / 1017028767 / 1017016542 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Verna |
| Model year | Confirm by OE reference |
| 97113-0U000 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6202-008, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6202-008 record remains the picking reference.
For trade item 6202-008, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6202-008 on the packing instruction.
Frequently Asked Questions
How should item 6202-008 and blower number 97113-0U000 be verified?
Match 6202-008 to the complete 97113-0U000 marking, then compare the 6202-008 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.
Can 6202-008 have more than one vehicle-side blower configuration?
Yes. HYUNDAI production changes can affect 6202-008; confirm steering position, climate-control specification and the original 6202-008 geometry before approval.
What circuit checks are useful when 6202-008 does not operate?
For 6202-008, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-008 motor again.
Which details should accompany a wholesale request for 6202-008?
Provide item 6202-008, OE 97113-0U000, the stated application, quantity and destination; add 6202-008 carton or private-label requirements separately.
How can noise be avoided after fitting 6202-008?
Clear debris from the air inlet, check that the 6202-008 wheel turns freely, seat the 6202-008 flange evenly and keep wiring away from the impeller.
Request a quote for 6202-008: Send 97113-0U000, the 6202-008 application and required quantity for a fitment and supply review.
