97113-01000 Blower Motor for HYUNDAI Kona
Primary OE reference: 97113-01000
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HYUNDAI Kona
Brand: HYUNDAI
Model: Kona
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
97113-01000 Automotive Blower Motor Overview
This listing links 97113-01000 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6202-015, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6202-015 when comparing this 97113-01000 airflow configuration.
OE Reference and Application
The primary catalogue number is 97113-01000. The recorded application is HYUNDAI Kona. For 6202-015, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6202-015 with the approved OE reference.
HVAC Interface and 97113-01000 installation
During work on 6202-015, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 97113-01000 installation. Recheck 6202-015 before the lower trim is closed.
For item 6202-015, confirm that the 97113-01000 centrifugal wheel clears its housing and that the 6202-015 connector lock engages without force. After seating 6202-015, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-015.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 97113-01000 |
| Cross-reference numbers | 97113-01000 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Kona |
| Model year | Confirm by OE reference |
| 97113-01000 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6202-015, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6202-015 record remains the picking reference.
For trade item 6202-015, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6202-015 on the packing instruction.
Frequently Asked Questions
How should item 6202-015 and blower number 97113-01000 be verified?
Match 6202-015 to the complete 97113-01000 marking, then compare the 6202-015 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.
Can 6202-015 have more than one vehicle-side blower configuration?
Yes. HYUNDAI production changes can affect 6202-015; confirm steering position, climate-control specification and the original 6202-015 geometry before approval.
What circuit checks are useful when 6202-015 does not operate?
For 6202-015, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-015 motor again.
Which details should accompany a wholesale request for 6202-015?
Provide item 6202-015, OE 97113-01000, the stated application, quantity and destination; add 6202-015 carton or private-label requirements separately.
How can noise be avoided after fitting 6202-015?
Clear debris from the air inlet, check that the 6202-015 wheel turns freely, seat the 6202-015 flange evenly and keep wiring away from the impeller.
Request a quote for 6202-015: Send 97113-01000, the 6202-015 application and required quantity for a fitment and supply review.
