92406-AA000 Rear Bumper Light for HYUNDAI Elantra 2021 Right
Primary OE reference: 92406-AA000
Product type: Rear Bumper Light
Applicable vehicle: HYUNDAI Elantra 2021
Installation position: Rear bumper / reflector opening
Side / orientation: Right
Brand: HYUNDAI
Model: Elantra
Vehicle year: 2021
Shape and clips: Compare the visible outline, rear housing depth and locating tabs with the removed part before ordering.
Rear visibility role: Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.
Powered-version check: Where a cable is fitted, inspect the seal and connector keying so the replacement does not introduce moisture or terminal stress.
Workshop guidance: Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Selection context: Check whether the bumper carries a plain reflector or an illuminated unit before approving the replacement.
Post-fit check: Make sure the component does not touch hot exhaust trim or trap wiring against a sharp body edge.
Quotation details: For a wholesale quotation, provide vehicle details, required side, quantity, destination and a photograph of the removed part.
Packing reference: Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.
92406-AA000 Rear Bumper Light Overview
This product is listed for HYUNDAI Elantra 2021 at the right rear-bumper position. Some versions are passive reflectors, while others contain a lamp or wiring. The photographed configuration defines the supplied type.
Use the removed component as the physical reference for outer shape, housing projection and clip location.
For the HYUNDAI Elantra application, use the opposite-side component only as an alignment reference, not as an interchange part to verify that the photographed configuration matches the vehicle in the workshop.
Rear-Bumper Geometry Review
Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.
Bumper designs can change during a model cycle, so verify the lens face and hidden support points together.
For this Elantra body configuration, compare the outer lens edge with the moulded bumper recess to avoid contact with wiring, body edges or hot exhaust components.
Before approving the Elantra part for packing, inspect the lower valance and nearby exhaust trim for adequate operating clearance to keep the optical face level with the surrounding painted surface.
Lens, Housing and Harness Comparison
Where a cable is fitted, inspect the seal and connector keying so the replacement does not introduce moisture or terminal stress.
Do not polish or modify the lens before fitment confirmation; altered parts are harder to compare accurately.
Before fitting the right unit, check the rear housing projection against the space behind the bumper skin before any modification is made to the bumper or replacement part.
While the HYUNDAI bumper opening is accessible, compare the bumper corner radius with the product face from more than one viewing angle before deciding whether original hardware is suitable for reuse.
Installation Completion
Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Verify that bumper movement does not load the lens and that the component remains fully clipped at every corner.
During comparison of the HYUNDAI rear component, align each locating tab with the matching slot before applying hand pressure because facelift bumpers can retain the same vehicle name with different apertures.
For a repeat order of the right version, check whether the original component uses a separate retainer or an integral locking tab so left- and right-hand stock cannot be mixed during consolidation.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 92406-AA000 |
| Cross-reference numbers | 92406-AA000 |
| Internal item code | HY04004-014 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Elantra |
| Model year | 2021 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Right |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
Trade enquiries should include the vehicle year, model, bumper position and destination market for accurate picking.
Projecting tabs should be supported with shaped material instead of carrying the weight of other products.
On the 2021 Elantra bumper layout, verify the fastener direction and the shape of the concealed support frame so the approved product can be picked consistently in a mixed wholesale order.
At the workshop selection stage for Elantra, protect the visible surface until the full perimeter gap has been accepted so hidden brackets are not loaded or bent during installation.
Frequently Asked Questions
Can the opposite side use the same part?
Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.
How is a passive reflector checked?
Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.
When should photographs be supplied?
Send front, rear and bumper-opening images when the original marking is unclear or several versions share the vehicle name.
Should original clips be reused?
Reuse hardware only when it is undamaged and correct for the photographed housing; replace distorted retainers.
What if the bumper opening differs?
Stop the installation and compare market version, trim level and hidden mounting geometry before modifying any part.
Request a Product-Specific Quote
Yongshang Auto can review the pictured configuration before preparing a quantity-based offer.
