92406-A7500 Rear Bumper Light for KIA K3 2016 Right

92406-A7500 Rear Bumper Light Overview

This product is listed for KIA K3 2016 at the right rear-bumper position. Rear-bumper lighting improves low-mounted vehicle visibility; reflector-only versions return light without an electrical connection.

Bumper designs can change during a model cycle, so verify the lens face and hidden support points together.

On the 2016 K3 bumper layout, inspect the lower valance and nearby exhaust trim for adequate operating clearance so the lens and housing are supported without distortion.

Application and Rear-Bumper Position

Review the corner radius, edge return and rear fastening points against the original bumper opening.

Production date and regional bumper specification should be reviewed when several near-identical versions are available.

At the workshop selection stage for K3, check the rear housing projection against the space behind the bumper skin so a passive reflector is not confused with an illuminated assembly.

At the right rear-bumper position, compare the bumper corner radius with the product face from more than one viewing angle to verify that the photographed configuration matches the vehicle in the workshop.

Optical Face and Connector Review

Powered assemblies should be tested for the intended rear-lighting function before the bumper liner is reinstalled.

Inspect the moulded tabs from the rear and avoid placing package or hand pressure on the centre of the lens.

When reviewing the 2016 vehicle, align each locating tab with the matching slot before applying hand pressure to avoid contact with wiring, body edges or hot exhaust components.

For the KIA K3 application, check whether the original component uses a separate retainer or an integral locking tab to keep the optical face level with the surrounding painted surface.

Workshop Fitting Sequence

Clean the bumper opening, inspect reusable clips and verify an even edge gap before final fastening.

For reflector types, confirm correct orientation; for powered types, test the circuit before closing access panels.

For this K3 body configuration, verify the fastener direction and the shape of the concealed support frame before any modification is made to the bumper or replacement part.

Before approving the K3 part for packing, protect the visible surface until the full perimeter gap has been accepted before deciding whether original hardware is suitable for reuse.

Automotive Lighting Product Specifications

Wholesale Supply and Protective Packing

Send front and rear photographs when the bumper uses several visually similar lens or wiring configurations.

Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.

Before fitting the right unit, review the reflector texture and lens colour in neutral workshop light because facelift bumpers can retain the same vehicle name with different apertures.

While the KIA bumper opening is accessible, record the approved side and vehicle application for repeat-order identification so left- and right-hand stock cannot be mixed during consolidation.

Frequently Asked Questions

How should the visible lens be packed?

Keep it isolated from carton pressure, loose hardware and neighbouring products with separate support for tabs.

What details help with a wholesale quote?

Provide vehicle, year, side, quantity, destination and clear photographs of the removed component.

How is a passive reflector checked?

Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.

What should be tested after fitting?

Check panel alignment and, for powered versions, verify the intended rear-lighting function before closing access panels.

Should original clips be reused?

Reuse hardware only when it is undamaged and correct for the photographed housing; replace distorted retainers.

Request a Product-Specific Quote

Destination and carton-marking requirements can be included with the vehicle-specific enquiry.