92406-A5100 Rear Bumper Light for HYUNDAI i30 2012 Right
Primary OE reference: 92406-A5100
Product type: Rear Bumper Light
Applicable vehicle: HYUNDAI i30 2012
Installation position: Rear bumper / reflector opening
Side / orientation: Right
Brand: HYUNDAI
Model: i30
Vehicle year: 2012
Shape and clips: Match the lens perimeter and rear support geometry rather than relying on colour or overall appearance alone.
Rear visibility role: Rear-bumper lighting improves low-mounted vehicle visibility; reflector-only versions return light without an electrical connection.
Powered-version check: If the original unit is powered, compare the socket, terminal count, cable exit and locking tab before installation.
Workshop guidance: After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
Selection context: The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.
Post-fit check: Reinstall the liner only after the housing is secure and the cable, if fitted, has adequate clearance.
Quotation details: Trade enquiries should include the vehicle year, model, bumper position and destination market for accurate picking.
Packing reference: Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.
92406-A5100 Rear Bumper Light Overview
This product is listed for HYUNDAI i30 2012 at the right rear-bumper position. The part occupies a vehicle-specific bumper opening and may function as a reflector, rear fog lamp or auxiliary marker.
The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.
While the HYUNDAI bumper opening is accessible, inspect the lower valance and nearby exhaust trim for adequate operating clearance so hidden brackets are not loaded or bent during installation.
Bumper Opening and Vehicle Match
Check the bumper recess, outer contour and clip orientation; similar reflectors can use different hidden mounts.
The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.
During comparison of the HYUNDAI rear component, check the rear housing projection against the space behind the bumper skin to preserve access for a final electrical test where a lamp circuit is present.
For a repeat order of the right version, compare the bumper corner radius with the product face from more than one viewing angle to reduce clip damage during a no-force trial installation.
Lens Construction and Powered Variants
If the original unit is powered, compare the socket, terminal count, cable exit and locking tab before installation.
Protect the exposed face from tools and fasteners while the bumper liner is open for access.
On the 2012 i30 bumper layout, align each locating tab with the matching slot before applying hand pressure to prevent a visually similar version from sitting proud of the bumper.
At the workshop selection stage for i30, check whether the original component uses a separate retainer or an integral locking tab before the packaging and carton marking are finalized.
Mounting and Final Verification
After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
Make sure the component does not touch hot exhaust trim or trap wiring against a sharp body edge.
At the right rear-bumper position, verify the fastener direction and the shape of the concealed support frame before inner liners make the rear attachment points difficult to inspect.
When reviewing the 2012 vehicle, protect the visible surface until the full perimeter gap has been accepted so the visible gap remains even after every retaining point is engaged.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 92406-A5100 |
| Cross-reference numbers | 92406-A5100 |
| Internal item code | HY04004-056 |
| Vehicle brand | HYUNDAI |
| Vehicle model | i30 |
| Model year | 2012 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Right |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
Confirm the required quantity and packaging method; exposed lens faces and projecting tabs need separate protection.
Projecting tabs should be supported with shaped material instead of carrying the weight of other products.
For the HYUNDAI i30 application, review the reflector texture and lens colour in neutral workshop light so the lens and housing are supported without distortion.
For this i30 body configuration, record the approved side and vehicle application for repeat-order identification so a passive reflector is not confused with an illuminated assembly.
Frequently Asked Questions
Why can the same model year use another version?
Regional equipment, facelift changes and bumper trim packages can alter the opening or electrical configuration.
Can appearance alone confirm compatibility?
No. A similar colour and outline can hide different clips, housing depth, wiring or side orientation.
What should be tested after fitting?
Check panel alignment and, for powered versions, verify the intended rear-lighting function before closing access panels.
Is this component illuminated or reflector-only?
Use the product photographs to confirm whether the rear body carries a connector, bulb holder or LED wiring.
What details help with a wholesale quote?
Provide vehicle, year, side, quantity, destination and clear photographs of the removed component.
Request a Product-Specific Quote
For mixed shipments, send a line-by-line quantity list so each rear-bumper position is quoted independently.
