92404-C1000 Rear Bumper Light for HYUNDAI Sonata 2014 Right
Primary OE reference: 92404-C1000
Product type: Rear Bumper Light
Applicable vehicle: HYUNDAI Sonata 2014
Installation position: Rear bumper / reflector opening
Side / orientation: Right
Brand: HYUNDAI
Model: Sonata
Vehicle year: 2014
Bumper interface: Review the corner radius, edge return and rear fastening points against the original bumper opening.
Product function: Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.
Connector review: Confirm separately whether the removed component uses wiring, a bulb holder or an integrated LED module.
Fitting note: Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Selection context: The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.
Post-fit check: Check the opposite side as a reference for height, angle and edge gap before completing the repair.
Trade-order details: Send front and rear photographs when the bumper uses several visually similar lens or wiring configurations.
Packing reference: Projecting tabs should be supported with shaped material instead of carrying the weight of other products.
92404-C1000 Rear Bumper Light Overview
This product is listed for HYUNDAI Sonata 2014 at the right rear-bumper position. This component completes the rear bumper lighting area and must match the correct side, lens type and vehicle trim.
The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.
When reviewing the 2014 vehicle, confirm that the cable exit, where fitted, clears the bumper reinforcement so a passive reflector is not confused with an illuminated assembly.
Bumper Opening and Vehicle Match
Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.
The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.
For the HYUNDAI Sonata application, confirm that any connector seal remains square when the housing is fully seated to verify that the photographed configuration matches the vehicle in the workshop.
For this Sonata body configuration, use the opposite-side component only as an alignment reference, not as an interchange part to avoid contact with wiring, body edges or hot exhaust components.
Lens Construction and Powered Variants
Confirm separately whether the removed component uses wiring, a bulb holder or an integrated LED module.
Inspect the moulded tabs from the rear and avoid placing package or hand pressure on the centre of the lens.
Before approving the Sonata part for packing, compare the outer lens edge with the moulded bumper recess to keep the optical face level with the surrounding painted surface.
Before fitting the right unit, inspect the lower valance and nearby exhaust trim for adequate operating clearance before any modification is made to the bumper or replacement part.
Mounting and Final Verification
Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Complete a visual alignment check from the rear and side, then test illumination when wiring is present.
While the HYUNDAI bumper opening is accessible, check the rear housing projection against the space behind the bumper skin before deciding whether original hardware is suitable for reuse.
During comparison of the HYUNDAI rear component, compare the bumper corner radius with the product face from more than one viewing angle because facelift bumpers can retain the same vehicle name with different apertures.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 92404-C1000 |
| Cross-reference numbers | 92404-C1000 |
| Internal item code | HY04004-018 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Sonata |
| Model year | 2014 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Right |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
For repeat orders, quote the vehicle application and side together so the correct bumper variant is selected.
Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.
For a repeat order of the right version, align each locating tab with the matching slot before applying hand pressure so left- and right-hand stock cannot be mixed during consolidation.
On the 2014 Sonata bumper layout, check whether the original component uses a separate retainer or an integral locking tab so the approved product can be picked consistently in a mixed wholesale order.
Frequently Asked Questions
Should original clips be reused?
Reuse hardware only when it is undamaged and correct for the photographed housing; replace distorted retainers.
What if the bumper opening differs?
Stop the installation and compare market version, trim level and hidden mounting geometry before modifying any part.
Which physical points matter most?
Compare exposed shape, housing depth, locating tabs, fastener spacing and any electrical connector.
What details help with a wholesale quote?
Provide vehicle, year, side, quantity, destination and clear photographs of the removed component.
Is this component illuminated or reflector-only?
Use the product photographs to confirm whether the rear body carries a connector, bulb holder or LED wiring.
Request a Product-Specific Quote
Clear application details allow the sales team to separate reflector and illuminated versions in the offer.
