92401-C4000 Tail Light for HYUNDAI Atos 2021 Left
Primary OE reference: 92401-C4000
Product type: Tail Light
Applicable vehicle: HYUNDAI Atos 2021
Installation position: Rear body / tail lamp opening
Side / orientation: Left
Brand: HYUNDAI
Model: Atos
Vehicle year: 2021
Housing check: Confirm the body aperture, lamp perimeter and attachment points as a set. This reduces the risk of selecting a market-specific version with a different rear shell.
Electrical interface: Check connector orientation and terminal arrangement before fitting. Do not assume that halogen and LED versions share the same internal electronics.
Installation guidance: Dry-fit the lamp before tightening fasteners. Align the locating pins first, maintain an even body gap and tighten gradually to avoid stressing the lens or mounting ears.
Wholesale enquiry: Bulk buyers should identify left and right quantities separately and provide the destination market. Original-part photographs are useful where several lighting packages exist.
92401-C4000 Tail Light Overview
This tail light is catalogued for direct vehicle comparison, with emphasis on the outer shape, rear casing and fixing points rather than appearance alone.
The listed application is HYUNDAI Atos 2021, with the lamp positioned on the left side. Use the photographs and specification table together when comparing the removed assembly.
Vehicle Fitment and Lamp Selection
Review both the visible lens shape and the concealed support points. The correct unit should sit evenly without forcing the body panel or nearby trim.
Confirm the production period and lighting package as well as the vehicle model. Facelift changes, regional equipment and body variants can alter the lens, reflector or fixing arrangement.
Housing, Lens and Electrical Interface
Inspect the plug shape, terminal count and connector locking direction. Bulb holders, LED drivers, wiring looms and control modules are included only when visible in the supplied photographs.
Inspect the lens for transport damage before fitting. The rear casing, vents and sealing edges should remain clean so moisture control and body fit are not compromised.
Installation Guidance
Clean the mounting area, inspect the body-side clips and place the lamp without force. Complete an illumination test before reinstalling interior trim or bumper components.
After installation, test the parking light, brake light, turn signal, reversing light and fog-light function where applicable. Verify that no warning message remains on the instrument panel.
Automotive Lighting Product Specifications
| Product type | Tail Light |
|---|---|
| Primary OE reference | 92401-C4000 |
| Cross-reference numbers | 92401-C4000 |
| Internal item code | HY04003-011 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Atos |
| Model year | 2021 |
| Installation position | Rear body / tail lamp opening |
| Side / orientation | Left |
| Selection basis | OE reference, vehicle application and physical comparison |
Wholesale Supply and Packing
For an accurate quotation, provide the vehicle application, mounting side, required quantity and delivery country. Note whether bulbs or electronic modules are required.
The lens face, connector area and projecting brackets should be isolated inside the carton. Separate labels for left- and right-hand units help prevent picking errors in mixed shipments.
Frequently Asked Questions
Are bulbs or electronic modules included?
The supply scope follows the product photographs. Ask separately about bulbs, holders, LED drivers, wiring and control modules if they are not clearly shown.
Can a similar-looking lamp be used instead?
Appearance alone is not sufficient. The body opening, housing depth, mounting points, connector and lighting technology must all match.
What should be checked before installation?
Compare the removed lamp with the supplied images, inspect the seal and brackets, confirm the electrical plug and carry out a dry fit before final tightening.
What details are required for a trade quotation?
Provide the vehicle application, production year, installation side, quantity, destination and clear photographs of the original lamp.
Request a Product-Specific Quote
Contact Yongshang Auto with the vehicle details, required side, quantity and destination. The photographed configuration can be reviewed before a wholesale quotation is prepared.
