92304-1R000 Fender Light for HYUNDAI Accent 2011 Right
Primary OE reference: 92304-1R000
Product type: Fender Light / Side Marker Lamp
Applicable vehicle: HYUNDAI Accent 2011
Installation position: Front fender / side marker opening
Side / orientation: Right
Brand: HYUNDAI
Model: Accent
Vehicle year: 2011
Physical comparison: Check the corner radius, edge return and clip spacing against the original opening before installation.
Lighting function: A properly matched unit combines the required signalling function with a flush interface to the surrounding panel.
Electrical check: Confirm the bulb base or LED module matches the original circuit before closing the rear access area.
Installation guidance: Restore the splash liner only after checking that the harness cannot rub against the tyre-side panel.
Selection context: Vehicle production period, market trim and the photographed connector should be reviewed together.
Product handling: Separate loose hardware from the lens face during handling and workshop preparation.
Wholesale enquiry: Include body style and lens colour in the enquiry when regional versions use different side repeaters.
92304-1R000 Fender Light Overview
This vehicle-specific fender light is listed for HYUNDAI Accent 2011 at the right side-marker position. The photographed lens, rear housing and electrical interface define the supplied configuration.
The OE reference should be checked together with body position and electrical configuration. Its optical face and electrical mode work together, so reflector appearance alone cannot prove compatibility.
Vehicle Application and Fender Position
Measure the housing projection and compare every moulded locator with the removed component.
For HYUNDAI Accent 2011, confirm the fender aperture, production period and stated side before ordering. The visible lens must align with the surrounding body surface while the concealed supports match the factory opening.
Lens, Housing and Electrical Interface
This side marker helps communicate vehicle presence and, where wired as an indicator, supports turn-signal visibility.
Confirm the harness reaches the lamp without tension and remains clear of sharp sheet-metal edges. Lens colour and reflector texture should also be compared under neutral lighting.
Installation and Function Check
Seat the locating peg before the spring clip and watch the painted edge for any sign of interference.
Protect the electrical plug from dust and impact while the workshop compares the hidden attachment points. After installation, operate the relevant marker or indicator circuit and inspect panel alignment from several angles.
Automotive Component Specifications
| Product type | Fender Light / Side Marker Lamp |
|---|---|
| Primary OE reference | 92304-1R000 |
| Cross-reference numbers | 92304-1R000 |
| Internal item code | HY04005-014 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 2011 |
| Installation position | Front fender / side marker opening |
| Side / orientation | Right |
Wholesale Supply and Packing
A consolidated offer can separate powered lamps, passive markers and colour variants into clear order lines. Each optical face should be isolated from loose hardware, while projecting tabs and connectors require shaped support inside the carton.
Frequently Asked Questions
How should 92304-1R000 compatibility be confirmed?
Match the OE reference, HYUNDAI Accent production year, installation side, connector and hidden mounting geometry.
Can left and right fender lamps be exchanged?
Do not assume interchangeability. Compare the lens angle, clip direction and connector exit for the required side.
What should be checked before installation?
Use the adjacent body crease as a visual reference while checking whether the optical face sits parallel. Inspect connector keying, terminal count and cable exit direction before connecting the replacement lamp.
What test is recommended after fitting?
Confirm the stated side and mounting direction before fastening; left and right versions are not always interchangeable.
Which details are needed for a wholesale quote?
Sample approval should record the fender position before volume production and export packing are released.
Need a quotation? Contact Yongshang Auto with the OE reference, vehicle details, side, quantity and destination.
