92302-1J000 Fender Light for HYUNDAI i20 PB 2012 Right
Primary OE reference: 92302-1J000
Product type: Fender Light / Side Marker Lamp
Applicable vehicle: HYUNDAI i20 PB 2012
Installation position: Front fender / side marker opening
Side / orientation: Right
Brand: HYUNDAI
Model: i20 PB
Vehicle year: 2012
Physical comparison: Use the adjacent body crease as a visual reference while checking whether the optical face sits parallel.
Lighting function: Its optical face and electrical mode work together, so reflector appearance alone cannot prove compatibility.
Electrical check: Inspect connector keying, terminal count and cable exit direction before connecting the replacement lamp.
Installation guidance: Confirm the stated side and mounting direction before fastening; left and right versions are not always interchangeable.
Selection context: Review the body code and lamp colour because appearance packages may use another optical finish.
Product handling: Check for fine lens cracks around the clip base where transport stress can remain difficult to see.
Wholesale enquiry: For distributor orders, identify vehicle generation and installation side on each requested line.
92302-1J000 Fender Light Overview
This vehicle-specific fender light is listed for HYUNDAI i20 PB 2012 at the right side-marker position. The photographed lens, rear housing and electrical interface define the supplied configuration.
Compare the supplied rear view with the removed lamp rather than relying on a front-only marketplace photo. Correct lens orientation and secure mounting preserve the side-lighting function and an even exterior finish.
Physical Selection Criteria
Place both units on a flat surface to compare connector angle, housing offset and support-leg length.
For HYUNDAI i20 PB 2012, confirm the fender aperture, production period and stated side before ordering. The visible lens must align with the surrounding body surface while the concealed supports match the factory opening.
Side-Lighting Configuration
As a lateral visibility component, the lamp should present its optical pattern at the designed viewing angle.
Route the short lead along the factory path so steering movement and wheel splash cannot load the connector. Lens colour and reflector texture should also be compared under neutral lighting.
Installation Completion
Clean the opening, engage the guide features first and press only at supported areas of the housing.
Separate loose hardware from the lens face during handling and workshop preparation. After installation, operate the relevant marker or indicator circuit and inspect panel alignment from several angles.
Automotive Component Specifications
| Product type | Fender Light / Side Marker Lamp |
|---|---|
| Primary OE reference | 92302-1J000 |
| Cross-reference numbers | 92302-1J000 |
| Internal item code | HY04005-028 |
| Vehicle brand | HYUNDAI |
| Vehicle model | i20 PB |
| Model year | 2012 |
| Installation position | Front fender / side marker opening |
| Side / orientation | Right |
Wholesale Supply and Packing
For wholesale pricing, provide OE reference, vehicle, side, quantity and destination. Each optical face should be isolated from loose hardware, while projecting tabs and connectors require shaped support inside the carton.
Frequently Asked Questions
How should 92302-1J000 compatibility be confirmed?
Match the OE reference, HYUNDAI i20 PB production year, installation side, connector and hidden mounting geometry.
Can left and right fender lamps be exchanged?
Do not assume interchangeability. Compare the lens angle, clip direction and connector exit for the required side.
What should be checked before installation?
Compare the lens outline, rear housing depth and locating-tab direction with the removed side marker. Compare the terminal blade orientation and locking ramp before the plug is brought into final engagement.
What test is recommended after fitting?
Apply even hand pressure along the supported frame instead of pressing the centre of the optical lens.
Which details are needed for a wholesale quote?
Trade enquiries should identify lens colour and connector type when these vary by market.
Need a quotation? Contact Yongshang Auto with the OE reference, vehicle details, side, quantity and destination.
