92301-1J000 Fender Light for HYUNDAI i20 PB 2012 Left
Primary OE reference: 92301-1J000
Product type: Fender Light / Side Marker Lamp
Applicable vehicle: HYUNDAI i20 PB 2012
Installation position: Front fender / side marker opening
Side / orientation: Left
Brand: HYUNDAI
Model: i20 PB
Vehicle year: 2012
Physical comparison: Confirm the lamp body sits level in the fender aperture without forcing the plastic retainers.
Lighting function: As a lateral visibility component, the lamp should present its optical pattern at the designed viewing angle.
Electrical check: Route the short lead along the factory path so steering movement and wheel splash cannot load the connector.
Installation guidance: Use the opposite fender lamp as an alignment reference while preserving the specified installation side.
Selection context: Similar lenses can hide different rear clips, so use the removed component as the physical reference.
Product handling: Confirm that projecting clips remain supported and free from carton pressure.
Wholesale enquiry: For paired purchasing, state whether equal left-right quantities or a single replacement side is required.
92301-1J000 Fender Light Overview
This vehicle-specific fender light is listed for HYUNDAI i20 PB 2012 at the left side-marker position. The photographed lens, rear housing and electrical interface define the supplied configuration.
Review the body code and lamp colour because appearance packages may use another optical finish. The lamp provides a compact signalling point whose beam direction depends on correct left-right placement.
Model, Year and Side Confirmation
Set the removed marker beside the replacement and compare lens taper, flange width and rear clip height.
For HYUNDAI i20 PB 2012, confirm the fender aperture, production period and stated side before ordering. The visible lens must align with the surrounding body surface while the concealed supports match the factory opening.
Housing Geometry and Wiring Details
The fender-mounted lamp provides a low-profile side lighting point whose optical face must retain the intended orientation.
Test the intended marker or indicator circuit before refitting the inner fender access panel. Lens colour and reflector texture should also be compared under neutral lighting.
Fitting Preparation and Alignment
Apply even hand pressure along the supported frame instead of pressing the centre of the optical lens.
Avoid stacking other components on the lamp face during storage, consolidation or local delivery. After installation, operate the relevant marker or indicator circuit and inspect panel alignment from several angles.
Automotive Component Specifications
| Product type | Fender Light / Side Marker Lamp |
|---|---|
| Primary OE reference | 92301-1J000 |
| Cross-reference numbers | 92301-1J000 |
| Internal item code | HY04005-027 |
| Vehicle brand | HYUNDAI |
| Vehicle model | i20 PB |
| Model year | 2012 |
| Installation position | Front fender / side marker opening |
| Side / orientation | Left |
Wholesale Supply and Packing
Provide the connector photograph with annual demand so stocking advice reflects the approved electrical version. Each optical face should be isolated from loose hardware, while projecting tabs and connectors require shaped support inside the carton.
Frequently Asked Questions
How should 92301-1J000 compatibility be confirmed?
Match the OE reference, HYUNDAI i20 PB production year, installation side, connector and hidden mounting geometry.
Can left and right fender lamps be exchanged?
Do not assume interchangeability. Compare the lens angle, clip direction and connector exit for the required side.
What should be checked before installation?
Compare the moulded parting line, locating peg and fastener boss before accepting the replacement geometry. Verify the socket or plug style and check that the seal remains square when the connector is locked.
What test is recommended after fitting?
Keep the painted panel protected, then verify an even perimeter gap after every locating point is engaged.
Which details are needed for a wholesale quote?
For distributor orders, identify vehicle generation and installation side on each requested line.
Need a quotation? Contact Yongshang Auto with the OE reference, vehicle details, side, quantity and destination.
