92202-H9000 Fog Light for KIA Rio 2017 Right
Primary OE reference: 92202-H9000
Product type: Fog Light
Applicable vehicle: KIA Rio 2017
Installation position: Front bumper
Installation side: Right
Brand: KIA
Model: Rio
Vehicle year: 2017
Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.
Housing and lens check: Use the product photos to compare the optical face, rear shell and surrounding clearance.
Mounting comparison: Confirm the mounting ears, bolt-hole spacing and bracket angles align with the vehicle opening.
Electrical connection: Compare the plug profile, pin arrangement and socket direction with the removed unit.
Lighting version: sedan application
Installation guidance: Route the wiring away from sharp edges and confirm the lamp sits level in the opening.
Quotation information: For quotation, provide the OE number, vehicle details, installation side and required quantity.
92202-H9000 Fog Light Product Overview
This page helps workshops and wholesale buyers distinguish the lamp from nearby left/right and trim variants. 92202-H9000 is catalogued as a fog light for KIA Rio 2017, installed at the right front bumper position. The source record identifies the lighting version as sedan application.
92202-H9000 — Vehicle Lighting Role
The lamp assembly works with the vehicle harness, switch logic and surrounding bumper trim as one installation system. For 92202-H9000 on the listed Rio, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU KA04002-118.
For SKU KA04002-118, request carton marking before a repeat export order. Quoting 92202-H9000 with the KIA Rio 2017 and right position helps separate lighting-technology and model-year variants during packing.
KA04002-118 — Part Number and Geometry Review
Start with the full reference 92202-H9000; then check the connector key and terminal count. Item KA04002-118 should not be approved if its housing, bracket layout, right orientation or market specification differs from the removed fog light.
92202-H9000 — Optical and Connector Details
Use the 92202-H9000 page photographs to review the visible lens pattern and housing finish. For electrical compatibility on SKU KA04002-118, verify bulb specification before transferring reusable parts and confirm the plug reaches its locked position without modification.
KA04002-118 — Workshop Preparation
Before securing 92202-H9000, inspect damaged brackets before installing the replacement. After connecting SKU KA04002-118, test its stated lighting function and check alignment, clearance and harness routing around the front bumper area.
Automotive Lighting Product Specifications
| Product type | Fog Light |
|---|---|
| Primary OE reference | 92202-H9000 |
| Cross-reference numbers | 92202-H9000 |
| Internal item code | KA04002-118 |
| Vehicle brand | KIA |
| Vehicle model | Rio |
| Model year | 2017 |
| Installation position | Front bumper |
| Installation side | Right |
| Lighting version | sedan application |
| Product function | Vehicle exterior lighting for the stated bumper position |
Wholesale Supply and Protective Packing
For 92202-H9000, protective wrapping limits abrasion on the lens while keeping the electrical connection dry and clean. For SKU KA04002-118, inner protection is arranged around the housing and connector so the optical surface does not carry the package load.
Frequently Asked Questions
Can model year alone confirm 92202-H9000 fitment?
No. For SKU KA04002-118, vehicles built in the same year can use different lighting packages, so use 92202-H9000 and the removed lamp geometry as the primary evidence.
What should be checked on the connector for 92202-H9000?
Compare pin count, keying, latch position and cable direction; for LED versions, also verify that the required electronics match the Rio application.
Does 92202-H9000 include a bulb or control module?
The supply scope for 92202-H9000 follows the SKU KA04002-118 photographs. Confirm bulbs, LED drivers, caps, brackets and wiring separately before ordering.
Is 92202-H9000 interchangeable between left and right sides?
No interchangeability should be assumed. The right housing, reflector orientation and brackets must correspond to the original bumper position.
How do I confirm 92202-H9000 for my vehicle?
Match 92202-H9000, the right position, vehicle year, housing depth, mounting ears and electrical connector with the original KIA lamp.
Request a Product-Specific Quote
Send the complete OE reference 92202-H9000, internal number KA04002-118, vehicle details, side, quantity and destination. Yongshang Auto can review the photographed configuration before preparing a trade quotation.
