92102-N9100 Head Light for HYUNDAI Tucson 2021 Right
Primary OE reference: 92102-N9100
Cross-reference number 1: 92102-N9100
Product type: Head Light Assembly
Applicable vehicle: HYUNDAI Tucson 2021
Installation position: Right front headlamp position
Brand: HYUNDAI
Model: Tucson
Vehicle year: 2021
Lighting configuration: LED lighting, premium equipment version
Housing comparison: Lay the replacement beside the removed unit and evaluate overall depth, edge returns, vent locations and rear-cover clearance.
Optical system: Check reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Electrical interface: The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
Mounting points: Check mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.
Installation guidance: After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
Wholesale packing: Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.
Application-specific focus: For the right HYUNDAI Tucson application with led lighting, premium equipment version, determine whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated led light source.
Head Light Assembly Overview
The listed unit is designed for the stated vehicle position and should be matched to the removed headlamp before installation. It is catalogued under OE reference 92102-N9100 for HYUNDAI Tucson 2021, with the right position identified in the source record.
The observable lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Check reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
For the Tucson application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use non-matching internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Review the complete lamp body from several angles because a similar lens can conceal a non-matching rear casing or bracket offset.
Check mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.
Connector and Control Hardware
Correspond to the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
Establish the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Transfer only undamaged reusable hardware, establish the rear caps seal correctly and verify lamp operation before completing surrounding trim.
A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92102-N9100 |
| Cross-reference numbers | 92102-N9100 |
| Internal item code | HY04001-274 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Tucson |
| Model year | 2021 |
| Installation position | Right front |
| Lighting configuration | LED lighting, premium equipment version |
Wholesale Supply and Protective Packing
Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.
When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right HYUNDAI Tucson headlamp, the led lighting, premium equipment version specification should be assessed together with the 2021 body application. Lay the replacement beside the removed unit and compare overall depth, edge returns, vent locations and rear-cover clearance.
The right Tucson lighting package should remain the reference during electrical review. The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
When fitting the HYUNDAI Tucson unit at the right front position, preserve even body gaps and the intended beam orientation. Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Frequently Asked Questions
Why must the rear housing be compared?
A similar lens can conceal a non-matching casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
What distinguishes surrounding lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
What information supports a wholesale quotation?
State the HYUNDAI Tucson application, production year, right side, lighting version, quantity and delivery country.
Can a headlamp be chosen by appearance alone?
No. The right lamp must also correspond to the optical system, electrical interface, mounting features and market specification.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
