92102-A5050 Head Light for HYUNDAI i30 2012 Right
Primary OE reference: 92102-A5050
Cross-reference number 1: 92102-A5050
Product type: Head Light Assembly
Applicable vehicle: HYUNDAI i30 2012
Installation position: Right front headlamp position
Brand: HYUNDAI
Model: i30
Vehicle year: 2012
Lighting configuration: US-market specification
Housing comparison: Verify that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
Optical system: Verify the number and position of optical chambers and verify whether daytime lighting is integrated into the main housing.
Electrical interface: Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
Mounting points: Verify that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.
Installation guidance: Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Wholesale packing: For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
Application-specific focus: For the right HYUNDAI i30 application with us-market specification, verify the number and position of optical chambers and verify whether daytime lighting is integrated into the main housing.
Head Light Assembly Overview
The headlamp shown should be specified as a complete vehicle-specific assembly, with side and lighting version confirmed before ordering. It is catalogued under OE reference 92102-A5050 for HYUNDAI i30 2012, with the right position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Verify the number and position of optical chambers and verify whether daytime lighting is integrated into the main housing.
For the i30 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use distinct internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Verify that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
Verify that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.
Connector and Control Hardware
The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
Verify the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
A qualified workshop should inspect surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92102-A5050 |
| Cross-reference numbers | 92102-A5050 |
| Internal item code | HY04001-326 |
| Vehicle brand | HYUNDAI |
| Vehicle model | i30 |
| Model year | 2012 |
| Installation position | Right front |
| Lighting configuration | US-market specification |
Wholesale Supply and Protective Packing
For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right HYUNDAI i30 headlamp, the us-market specification specification should be assessed together with the 2012 body application. Lay the replacement beside the removed unit and evaluate overall depth, edge returns, vent locations and rear-cover clearance.
The right i30 lighting package should remain the reference during electrical review. Evaluate every plug and socket with the original unit and establish whether the levelling motor, ballast or LED driver is included or transferred.
When fitting the HYUNDAI i30 unit at the right front position, preserve even body gaps and the intended beam orientation. After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
Frequently Asked Questions
What should be checked before installation?
For the i30, inspect the vehicle supports, compare every fixing point, verify the connector and complete a no-force trial fit.
Can a headlamp be chosen by appearance alone?
No. The right lamp must also correspond to the optical system, electrical interface, mounting features and market specification.
Are bulbs and electronic modules included?
The included components are those external in the product photographs. Inspect bulbs, caps, motors, ballasts and LED modules separately.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
Why must the rear housing be compared?
A similar lens can conceal a distinct casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
