92102-4X510 Head Light for KIA K2 2014 Right
Primary OE reference: 92102-4X510
Cross-reference number 1: 92102-4X510
Product type: Head Light Assembly
Applicable vehicle: KIA K2 2014
Installation position: Right front headlamp position
Brand: KIA
Model: K2
Vehicle year: 2014
Lighting configuration: premium equipment version
Housing comparison: Evaluate the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
Optical system: Check reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Electrical interface: Validate compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Mounting points: A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Installation guidance: Complete a no-force trial fit first; once the panel gaps are even, secure the unit and adjust the beam to workshop specifications.
Wholesale packing: Left and right units should be labelled separately, and internal supports should keep the lamp from moving inside the export carton.
Application-specific focus: For the right KIA K2 application with premium equipment version, validate that the beam system and external lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Head Light Assembly Overview
This replacement head light is intended for application-specific sourcing rather than universal installation. It is catalogued under OE reference 92102-4X510 for KIA K2 2014, with the right position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Review reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
For the K2 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use distinct internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Lay the replacement beside the removed unit and review overall depth, edge returns, vent locations and rear-cover clearance.
A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Connector and Control Hardware
Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
Validate the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Complete a no-force trial fit first; once the panel gaps are even, secure the unit and adjust the beam to workshop specifications.
A qualified workshop should look over surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92102-4X510 |
| Cross-reference numbers | 92102-4X510 |
| Internal item code | KA04001-164 |
| Vehicle brand | KIA |
| Vehicle model | K2 |
| Model year | 2014 |
| Installation position | Right front |
| Lighting configuration | premium equipment version |
Wholesale Supply and Protective Packing
Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.
When requesting a quotation, include the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right KIA K2 headlamp, the premium equipment version specification should be assessed together with the 2014 body application. Review the complete lamp body from several angles because a similar lens can conceal a distinct rear casing or bracket offset.
The right K2 lighting package should remain the reference during electrical review. The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
When fitting the KIA K2 unit at the right front position, preserve even body gaps and the intended beam orientation. Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Frequently Asked Questions
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
Are bulbs and electronic modules included?
The included components are those external in the product photographs. Review bulbs, caps, motors, ballasts and LED modules separately.
When is professional beam aiming required?
Beam alignment should be checked after the unit is secured and every lighting function has been tested.
What should be checked before installation?
For the K2, look over the vehicle supports, evaluate every fixing point, verify the connector and complete a no-force trial fit.
