92102-2P000 Head Light for KIA Sorento 2012 Right
Primary OE reference: 92102-2P000
Cross-reference number 1: 92102-2P000
Product type: Head Light Assembly
Applicable vehicle: KIA Sorento 2012
Installation position: Right front headlamp position
Brand: KIA
Model: Sorento
Vehicle year: 2012
Lighting configuration: Correspond to the photographed optical configuration
Housing comparison: Use the original assembly to verify the shell profile, upper support shape and clearance around adjacent trim before installation.
Optical system: Verify the number and position of optical chambers and establish whether daytime lighting is integrated into the main housing.
Electrical interface: Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Mounting points: Look over every upper, lower, inner and outer mounting tab for position and angle before paintwork or final installation.
Installation guidance: After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
Wholesale packing: For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
Application-specific focus: For the right KIA Sorento application with correspond to the photographed optical configuration, verify reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Head Light Assembly Overview
The photographed assembly is supplied for buyers comparing a complete front lighting unit by vehicle application and physical construction. It is catalogued under OE reference 92102-2P000 for KIA Sorento 2012, with the right position identified in the source record.
The visible lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Verify the number and position of optical chambers and establish whether daytime lighting is integrated into the main housing.
For the Sorento application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use non-matching internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Check the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate adjacent variants.
Review every upper, lower, inner and outer mounting tab for position and angle before paintwork or final installation.
Connector and Control Hardware
Correspond to the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
Establish the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
A qualified workshop should review surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92102-2P000 |
| Cross-reference numbers | 92102-2P000 |
| Internal item code | KA04001-018 |
| Vehicle brand | KIA |
| Vehicle model | Sorento |
| Model year | 2012 |
| Installation position | Right front |
| Lighting configuration | Match the photographed optical configuration |
Wholesale Supply and Protective Packing
Left and right units should be labelled separately, and internal supports should keep the lamp from moving inside the export carton.
When requesting a quotation, state the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right KIA Sorento headlamp, the correspond to the photographed optical configuration specification should be assessed together with the 2012 body application. Lay the replacement beside the removed unit and evaluate overall depth, edge returns, vent locations and rear-cover clearance.
The right Sorento lighting package should remain the reference during electrical review. Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
When fitting the KIA Sorento unit at the right front position, preserve even body gaps and the intended beam orientation. After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
Frequently Asked Questions
What distinguishes adjacent lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
Can a headlamp be chosen by appearance alone?
No. The right lamp must also correspond to the optical system, electrical interface, mounting features and market specification.
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
How should headlamp fitment be confirmed?
For the right Sorento lamp, cross-check the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
Are left and right headlamps interchangeable?
No. This application requires the right side; bracket geometry, optical pattern and wiring position are side-specific.
