92102-22300 Head Light for HYUNDAI Accent 1998 Right
Primary OE reference: 92102-22300
Cross-reference number 1: 92102-22300
Product type: Head Light Assembly
Applicable vehicle: HYUNDAI Accent 1998
Installation position: Right front headlamp position
Brand: HYUNDAI
Model: Accent
Vehicle year: 1998
Lighting configuration: Agree with the photographed optical configuration
Housing comparison: Use the original assembly to verify the shell profile, upper support shape and clearance around nearby trim before installation.
Optical system: Establish that the beam system and observable lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Electrical interface: Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Mounting points: Review every upper, lower, inner and outer mounting tab for position and angle before paintwork or final installation.
Installation guidance: After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
Wholesale packing: For repeat orders, preserve the approved product photographs and application record so the same optical and mounting version is chosen.
Application-specific focus: For the right HYUNDAI Accent application with agree with the photographed optical configuration, verify reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Head Light Assembly Overview
The photographed assembly is supplied for buyers comparing a complete front lighting unit by vehicle application and physical construction. It is catalogued under OE reference 92102-22300 for HYUNDAI Accent 1998, with the right position identified in the source record.
The observable lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Confirm that the beam system and visible lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
For the Accent application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use different internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Inspect the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate neighbouring variants.
Examine every upper, lower, inner and outer mounting tab for position and angle before paintwork or final installation.
Connector and Control Hardware
Match the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
Confirm the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Use approved workshop procedures for removal and refitting, then verify that vibration, panel pressure and cable routing do not stress the housing.
A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92102-22300 |
| Cross-reference numbers | 92102-22300 |
| Internal item code | HY04001-040 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 1998 |
| Installation position | Right front |
| Lighting configuration | Match the photographed optical configuration |
Wholesale Supply and Protective Packing
Carton protection should prevent abrasion on the lens and impact loading on brackets, caps, adjusters or exposed control modules.
When requesting a quotation, include the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right HYUNDAI Accent headlamp, the match the photographed optical configuration specification should be assessed together with the 1998 body application. Review the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate neighbouring variants.
The right Accent lighting package should remain the reference during electrical review. Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
When fitting the HYUNDAI Accent unit at the right front position, preserve even body gaps and the intended beam orientation. Transfer only undamaged reusable hardware, confirm the rear caps seal correctly and verify lamp operation before completing surrounding trim.
Frequently Asked Questions
What should be checked before installation?
For the Accent, examine the vehicle supports, evaluate every fixing point, verify the connector and complete a no-force trial fit.
Are bulbs and electronic modules included?
The included components are those observable in the product photographs. Review bulbs, caps, motors, ballasts and LED modules separately.
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
When is professional beam aiming required?
Beam alignment should be checked after the unit is secured and every lighting function has been tested.
Are left and right headlamps interchangeable?
No. This application requires the right side; bracket geometry, optical pattern and wiring position are side-specific.
