92102-1Y000 Head Light for KIA Picanto 2011 Right
Primary OE reference: 92102-1Y000
Cross-reference number 1: 92102-1Y000
Product type: Head Light Assembly
Applicable vehicle: KIA Picanto 2011
Installation position: Right front headlamp position
Brand: KIA
Model: Picanto
Vehicle year: 2011
Lighting configuration: Match the photographed optical configuration
Housing comparison: Review the complete lamp body from several angles because a similar lens can conceal a distinct rear casing or bracket offset.
Optical system: Identify whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated LED light source.
Electrical interface: Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Mounting points: Establish that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.
Installation guidance: Use approved workshop procedures for removal and refitting, then verify that vibration, panel pressure and cable routing do not stress the housing.
Wholesale packing: Left and right units should be labelled separately, and internal supports should keep the lamp from moving inside the export carton.
Application-specific focus: For the right KIA Picanto application with match the photographed optical configuration, verify reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Head Light Assembly Overview
This listing covers a model-specific headlamp assembly whose optical system, brackets and electrical interface must be checked together. It is catalogued under OE reference 92102-1Y000 for KIA Picanto 2011, with the right position identified in the source record.
The photographed lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Determine whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated LED light source.
For the Picanto application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use distinct internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Check the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate nearby variants.
Validate that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.
Connector and Control Hardware
Validate compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Validate the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Complete a no-force trial fit first; once the panel gaps are even, secure the unit and adjust the beam to workshop specifications.
A qualified workshop should inspect surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92102-1Y000 |
| Cross-reference numbers | 92102-1Y000 |
| Internal item code | KA04001-090 |
| Vehicle brand | KIA |
| Vehicle model | Picanto |
| Model year | 2011 |
| Installation position | Right front |
| Lighting configuration | Match the photographed optical configuration |
Wholesale Supply and Protective Packing
For repeat orders, record the approved product photographs and application record so the same optical and mounting version is requested.
When requesting a quotation, include the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right KIA Picanto headlamp, the agree with the photographed optical configuration specification should be assessed together with the 2011 body application. Verify the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate adjacent variants.
The right Picanto lighting package should remain the reference during electrical review. Validate compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
When fitting the KIA Picanto unit at the right front position, preserve even body gaps and the intended beam orientation. Use suitable workshop procedures for removal and refitting, then validate that vibration, panel pressure and cable routing do not stress the housing.
Frequently Asked Questions
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
What information supports a wholesale quotation?
State the KIA Picanto application, production year, right side, lighting version, quantity and delivery country.
How can connector compatibility be reviewed?
Cross-check keying, terminal count, latch direction and wire exit, then recognize any required ballast, driver or levelling motor.
Can a headlamp be chosen by appearance alone?
No. The right lamp must also agree with the optical system, electrical interface, mounting features and market specification.
Why must the rear housing be compared?
A similar lens can conceal a distinct casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
