92102-1C500 Head Light for HYUNDAI Getz 2006 Right
Primary OE reference: 92102-1C500
Cross-reference number 1: 92102-1C500
Product type: Head Light Assembly
Applicable vehicle: HYUNDAI Getz 2006
Installation position: Right front headlamp position
Brand: HYUNDAI
Model: Getz
Vehicle year: 2006
Lighting configuration: Match the photographed optical configuration
Housing comparison: Compare the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
Optical system: Examine the lens pattern, internal bezel finish and optical modules so the chosen unit matches the intended lighting package.
Electrical interface: The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
Mounting points: Inspect mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.
Installation guidance: After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
Wholesale packing: Carton protection should prevent abrasion on the lens and impact loading on brackets, caps, adjusters or exposed control modules.
Application-specific focus: For the right HYUNDAI Getz application with match the photographed optical configuration, establish that the beam system and photographed lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Head Light Assembly Overview
This replacement head light is intended for application-specific sourcing rather than universal installation. It is catalogued under OE reference 92102-1C500 for HYUNDAI Getz 2006, with the right position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Examine the lens pattern, internal bezel finish and optical modules so the requested unit matches the intended lighting package.
For the Getz application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use distinct internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Review the complete lamp body from several angles because a similar lens can conceal a distinct rear casing or bracket offset.
Review mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.
Connector and Control Hardware
Agree with the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
Establish the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92102-1C500 |
| Cross-reference numbers | 92102-1C500 |
| Internal item code | HY04001-018 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Getz |
| Model year | 2006 |
| Installation position | Right front |
| Lighting configuration | Match the photographed optical configuration |
Wholesale Supply and Protective Packing
Mixed orders should recognize vehicle application and side clearly, with protective packing around the optical face and electrical connections.
When requesting a quotation, include the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right HYUNDAI Getz headlamp, the agree with the photographed optical configuration specification should be assessed together with the 2006 body application. Review the complete lamp body from several angles because a similar lens can conceal a alternative rear casing or bracket offset.
The right Getz lighting package should remain the reference during electrical review. Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
When fitting the HYUNDAI Getz unit at the right front position, preserve even body gaps and the intended beam orientation. Tighten the fasteners evenly, restore nearby covers only after functional testing, and inspect bonnet and bumper clearances one final time.
Frequently Asked Questions
Are bulbs and electronic modules included?
The included components are those external in the product photographs. Inspect bulbs, caps, motors, ballasts and LED modules separately.
What distinguishes nearby lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
Are left and right headlamps interchangeable?
No. This application requires the right side; bracket geometry, optical pattern and wiring position are side-specific.
When is professional beam aiming required?
Beam alignment should be checked after the unit is secured and every lighting function has been tested.
Why must the rear housing be compared?
A similar lens can conceal a distinct casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
