92102-1C010 Head Light for HYUNDAI Getz 2002 Right
Primary OE reference: 92102-1C010
Cross-reference number 1: 92102-1C010
Product type: Head Light Assembly
Applicable vehicle: HYUNDAI Getz 2002
Installation position: Right front headlamp position
Brand: HYUNDAI
Model: Getz
Vehicle year: 2002
Lighting configuration: Correspond to the photographed optical configuration
Housing comparison: Confirm that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
Optical system: Review reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Electrical interface: Confirm compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Mounting points: Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Installation guidance: After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
Wholesale packing: Carton protection should prevent abrasion on the lens and impact loading on brackets, caps, adjusters or exposed control modules.
Application-specific focus: For the right HYUNDAI Getz application with correspond to the photographed optical configuration, compare the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
Head Light Assembly Overview
The headlamp shown should be requested as a complete vehicle-specific assembly, with side and lighting version confirmed before ordering. It is catalogued under OE reference 92102-1C010 for HYUNDAI Getz 2002, with the right position identified in the source record.
The visible lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Check reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
For the Getz application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use distinct internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Lay the replacement beside the removed unit and cross-check overall depth, edge returns, vent locations and rear-cover clearance.
Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Connector and Control Hardware
Align with the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
Confirm the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92102-1C010 |
| Cross-reference numbers | 92102-1C010 |
| Internal item code | HY04001-016 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Getz |
| Model year | 2002 |
| Installation position | Right front |
| Lighting configuration | Match the photographed optical configuration |
Wholesale Supply and Protective Packing
Left and right units should be labelled separately, and internal supports should keep the lamp from moving inside the export carton.
When requesting a quotation, include the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right HYUNDAI Getz headlamp, the align with the photographed optical configuration specification should be assessed together with the 2002 body application. Review the complete lamp body from several angles because a similar lens can conceal a different rear casing or bracket offset.
The right Getz lighting package should remain the reference during electrical review. Align with the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
When fitting the HYUNDAI Getz unit at the right front position, preserve even body gaps and the intended beam orientation. After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
Frequently Asked Questions
Are left and right headlamps interchangeable?
No. This application requires the right side; bracket geometry, optical pattern and wiring position are side-specific.
Why must the rear housing be compared?
A similar lens can conceal a distinct casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
What distinguishes adjacent lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
When is professional beam aiming required?
Beam alignment should be checked after the unit is secured and every lighting function has been tested.
