92102-17600 Head Light for HYUNDAI Matrix 2005 Right
Primary OE reference: 92102-17600
Cross-reference number 1: 92102-17600
Product type: Head Light Assembly
Applicable vehicle: HYUNDAI Matrix 2005
Installation position: Right front headlamp position
Brand: HYUNDAI
Model: Matrix
Vehicle year: 2005
Lighting configuration: Match the photographed optical configuration
Housing comparison: Evaluate the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
Optical system: Evaluate the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
Electrical interface: Match the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
Mounting points: Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Installation guidance: Use suitable workshop procedures for removal and refitting, then validate that vibration, panel pressure and cable routing do not stress the housing.
Wholesale packing: For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
Application-specific focus: For the right HYUNDAI Matrix application with match the photographed optical configuration, review the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
Head Light Assembly Overview
This replacement head light is intended for application-specific sourcing rather than universal installation. It is catalogued under OE reference 92102-17600 for HYUNDAI Matrix 2005, with the right position identified in the source record.
The visible lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Review the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
For the Matrix application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use alternative internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Review the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Connector and Control Hardware
Verify compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Verify the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92102-17600 |
| Cross-reference numbers | 92102-17600 |
| Internal item code | HY04001-028 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Matrix |
| Model year | 2005 |
| Installation position | Right front |
| Lighting configuration | Match the photographed optical configuration |
Wholesale Supply and Protective Packing
For repeat orders, record the approved product photographs and application record so the same optical and mounting version is chosen.
When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right HYUNDAI Matrix headlamp, the match the photographed optical configuration specification should be assessed together with the 2005 body application. Evaluate the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
The right Matrix lighting package should remain the reference during electrical review. Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
When fitting the HYUNDAI Matrix unit at the right front position, preserve even body gaps and the intended beam orientation. Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Frequently Asked Questions
What should be checked before installation?
For the Matrix, examine the vehicle supports, evaluate every fixing point, verify the connector and complete a no-force trial fit.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
Why must the rear housing be compared?
A similar lens can conceal a alternative casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
Can a headlamp be chosen by appearance alone?
No. The right lamp must also match the optical system, electrical interface, mounting features and market specification.
Are bulbs and electronic modules included?
The included components are those visible in the product photographs. Check bulbs, caps, motors, ballasts and LED modules separately.
