92101-A7610 Head Light for KIA K3 2016 Left
Primary OE reference: 92101-A7610
Cross-reference number 1: 92101-A7610
Product type: Head Light Assembly
Applicable vehicle: KIA K3 2016
Installation position: Left front headlamp position
Brand: KIA
Model: K3
Vehicle year: 2016
Lighting configuration: light internal bezel, US-market specification
Housing comparison: Cross-check the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
Optical system: Review the lens pattern, internal bezel finish and optical modules so the selected unit matches the intended lighting package.
Electrical interface: The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
Mounting points: A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Installation guidance: Use suitable workshop procedures for removal and refitting, then validate that vibration, panel pressure and cable routing do not stress the housing.
Wholesale packing: Carton protection should prevent abrasion on the lens and impact loading on brackets, caps, adjusters or exposed control modules.
Application-specific focus: For the left KIA K3 application with light internal bezel, us-market specification, establish whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated led light source.
Head Light Assembly Overview
This replacement head light is intended for application-specific sourcing rather than universal installation. It is catalogued under OE reference 92101-A7610 for KIA K3 2016, with the left position identified in the source record.
The observable lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Inspect the lens pattern, internal bezel finish and optical modules so the selected unit matches the intended lighting package.
For the K3 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use distinct internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Review the complete lamp body from several angles because a similar lens can conceal a distinct rear casing or bracket offset.
A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Connector and Control Hardware
Verify compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Verify the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
A qualified workshop should inspect surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92101-A7610 |
| Cross-reference numbers | 92101-A7610 |
| Internal item code | KA04001-209 |
| Vehicle brand | KIA |
| Vehicle model | K3 |
| Model year | 2016 |
| Installation position | Left front |
| Lighting configuration | light internal bezel, US-market specification |
Wholesale Supply and Protective Packing
For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
When requesting a quotation, supply the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left KIA K3 headlamp, the light internal bezel, us-market specification specification should be assessed together with the 2016 body application. Cross-check the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
The left K3 lighting package should remain the reference during electrical review. Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
When fitting the KIA K3 unit at the left front position, preserve even body gaps and the intended beam orientation. Use recommended workshop procedures for removal and refitting, then validate that vibration, panel pressure and cable routing do not stress the housing.
Frequently Asked Questions
What information supports a wholesale quotation?
State the KIA K3 application, production year, left side, lighting version, quantity and delivery country.
Are bulbs and electronic modules included?
The included components are those observable in the product photographs. Check bulbs, caps, motors, ballasts and LED modules separately.
How should headlamp fitment be confirmed?
For the left K3 lamp, cross-check the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
What distinguishes surrounding lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
