92101-A7500 Head Light for KIA K3 2016 Left
Primary OE reference: 92101-A7500
Cross-reference number 1: 92101-A7500
Product type: Head Light Assembly
Applicable vehicle: KIA K3 2016
Installation position: Left front headlamp position
Brand: KIA
Model: K3
Vehicle year: 2016
Lighting configuration: black internal bezel, China-market specification
Housing comparison: Review the complete lamp body from several angles because a similar lens can conceal a distinct rear casing or bracket offset.
Optical system: Cross-check the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
Electrical interface: Match the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
Mounting points: Inspect every upper, lower, inner and outer mounting tab for position and angle before paintwork or final installation.
Installation guidance: Transfer only undamaged reusable hardware, confirm the rear caps seal correctly and verify lamp operation before completing surrounding trim.
Wholesale packing: Left and right units should be labelled separately, and internal supports should keep the lamp from moving inside the export carton.
Application-specific focus: For the left KIA K3 application with black internal bezel, china-market specification, determine whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated led light source.
Head Light Assembly Overview
This listing covers a model-specific headlamp assembly whose optical system, brackets and electrical interface must be checked together. It is catalogued under OE reference 92101-A7500 for KIA K3 2016, with the left position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Compare the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
For the K3 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use distinct internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Compare the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
Examine every upper, lower, inner and outer mounting tab for position and angle before paintwork or final installation.
Connector and Control Hardware
Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Validate the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Complete a no-force trial fit first; once the panel gaps are even, secure the unit and adjust the beam to workshop specifications.
A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92101-A7500 |
| Cross-reference numbers | 92101-A7500 |
| Internal item code | KA04001-203 |
| Vehicle brand | KIA |
| Vehicle model | K3 |
| Model year | 2016 |
| Installation position | Left front |
| Lighting configuration | black internal bezel, China-market specification |
Wholesale Supply and Protective Packing
Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.
When requesting a quotation, include the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left KIA K3 headlamp, the black internal bezel, china-market specification specification should be assessed together with the 2016 body application. Compare the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
The left K3 lighting package should remain the reference during electrical review. Validate compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
When fitting the KIA K3 unit at the left front position, preserve even body gaps and the intended beam orientation. Tighten the fasteners evenly, restore nearby covers only after functional testing, and verify bonnet and bumper clearances one final time.
Frequently Asked Questions
Are left and right headlamps interchangeable?
No. This application requires the left side; bracket geometry, optical pattern and wiring position are side-specific.
What information supports a wholesale quotation?
State the KIA K3 application, production year, left side, lighting version, quantity and delivery country.
Are bulbs and electronic modules included?
The included components are those external in the product photographs. Verify bulbs, caps, motors, ballasts and LED modules separately.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
How should headlamp fitment be confirmed?
For the left K3 lamp, compare the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
