92101-1C510 Head Light for HYUNDAI Getz 2006 Left
Primary OE reference: 92101-1C510
Cross-reference number 1: 92101-1C510
Product type: Head Light Assembly
Applicable vehicle: HYUNDAI Getz 2006
Installation position: Left front headlamp position
Brand: HYUNDAI
Model: Getz
Vehicle year: 2006
Lighting configuration: power-adjustment version
Housing comparison: Review the complete lamp body from several angles because a similar lens can conceal a alternative rear casing or bracket offset.
Optical system: Review the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
Electrical interface: Align with the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
Mounting points: Verify that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.
Installation guidance: Use suitable workshop procedures for removal and refitting, then verify that vibration, panel pressure and cable routing do not stress the housing.
Wholesale packing: Mixed orders should determine vehicle application and side clearly, with protective packing around the optical face and electrical connections.
Application-specific focus: For the left HYUNDAI Getz application with power-adjustment version, review the lens pattern, internal bezel finish and optical modules so the requested unit matches the intended lighting package.
Head Light Assembly Overview
This listing covers a model-specific headlamp assembly whose optical system, brackets and electrical interface must be checked together. It is catalogued under OE reference 92101-1C510 for HYUNDAI Getz 2006, with the left position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Compare the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
For the Getz application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use alternative internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Compare the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
Confirm that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.
Connector and Control Hardware
Confirm compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Confirm the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Tighten the fasteners evenly, restore surrounding covers only after functional testing, and check bonnet and bumper clearances one final time.
A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92101-1C510 |
| Cross-reference numbers | 92101-1C510 |
| Internal item code | HY04001-019 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Getz |
| Model year | 2006 |
| Installation position | Left front |
| Lighting configuration | power-adjustment version |
Wholesale Supply and Protective Packing
Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.
When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left HYUNDAI Getz headlamp, the power-adjustment version specification should be assessed together with the 2006 body application. Compare the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
The left Getz lighting package should remain the reference during electrical review. Confirm compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
When fitting the HYUNDAI Getz unit at the left front position, preserve even body gaps and the intended beam orientation. After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
Frequently Asked Questions
What information supports a wholesale quotation?
State the HYUNDAI Getz application, production year, left side, lighting version, quantity and delivery country.
How can connector compatibility be reviewed?
Compare keying, terminal count, latch direction and wire exit, then recognize any required ballast, driver or levelling motor.
When is professional beam aiming required?
Beam alignment should be checked after the unit is secured and every lighting function has been tested.
Can a headlamp be chosen by appearance alone?
No. The left lamp must also correspond to the optical system, electrical interface, mounting features and market specification.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
