92101-1C500 Head Light for HYUNDAI Getz 2006 Left
Primary OE reference: 92101-1C500
Cross-reference number 1: 92101-1C500
Product type: Head Light Assembly
Applicable vehicle: HYUNDAI Getz 2006
Installation position: Left front headlamp position
Brand: HYUNDAI
Model: Getz
Vehicle year: 2006
Lighting configuration: Correspond to the photographed optical configuration
Housing comparison: Review the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
Optical system: Confirm that the beam system and visible lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Electrical interface: Confirm compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Mounting points: Review every upper, lower, inner and outer mounting tab for position and angle before paintwork or final installation.
Installation guidance: Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Wholesale packing: Carton protection should prevent abrasion on the lens and impact loading on brackets, caps, adjusters or exposed control modules.
Application-specific focus: For the left HYUNDAI Getz application with correspond to the photographed optical configuration, identify whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated led light source.
Head Light Assembly Overview
This replacement head light is intended for application-specific sourcing rather than universal installation. It is catalogued under OE reference 92101-1C500 for HYUNDAI Getz 2006, with the left position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Validate that the beam system and observable lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
For the Getz application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use different internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Lay the replacement beside the removed unit and cross-check overall depth, edge returns, vent locations and rear-cover clearance.
Look over every upper, lower, inner and outer mounting tab for position and angle before paintwork or final installation.
Connector and Control Hardware
The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
Validate the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
A qualified workshop should look over surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 92101-1C500 |
| Cross-reference numbers | 92101-1C500 |
| Internal item code | HY04001-017 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Getz |
| Model year | 2006 |
| Installation position | Left front |
| Lighting configuration | Match the photographed optical configuration |
Wholesale Supply and Protective Packing
For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
When requesting a quotation, state the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left HYUNDAI Getz headlamp, the agree with the photographed optical configuration specification should be assessed together with the 2006 body application. Review the complete lamp body from several angles because a similar lens can conceal a distinct rear casing or bracket offset.
The left Getz lighting package should remain the reference during electrical review. Agree with the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
When fitting the HYUNDAI Getz unit at the left front position, preserve even body gaps and the intended beam orientation. Transfer only undamaged reusable hardware, validate the rear caps seal correctly and verify lamp operation before completing surrounding trim.
Frequently Asked Questions
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
What information supports a wholesale quotation?
State the HYUNDAI Getz application, production year, left side, lighting version, quantity and delivery country.
Are left and right headlamps interchangeable?
No. This application requires the left side; bracket geometry, optical pattern and wiring position are side-specific.
What distinguishes adjacent lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
