8Y0855276A Front Right Headlight Washer Nozzle Cover for AUDI A3 2021
Primary OE reference: 8Y0855276A
Cross-reference number 1: 8Y0 855 276 A
Cross-reference number 2: 8Y0855276A
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI A3 2021
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A3
Model year: 2021
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-004
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8Y0855276A Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 8Y0855276A is a front right headlight washer nozzle cover intended for AUDI A3 2021. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry and sport version against the original vehicle part.
Fitment and Washer-System Application for A3
Compatibility for 8Y0855276A should be confirmed against AUDI A3 2021 and the right installation side. The review should verify nearby parking-sensor or trim interfaces, confirm the front bumper option before ordering, and verify the required left or right installation side. Use the removed part and product photographs to check the production date where model-year transitions overlap, check regional variations in headlamp-cleaning equipment, and review body-style differences within the same model generation; finally, confirm that the vehicle is equipped with a factory headlight washer system and match the mounting pattern around the bumper aperture.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-004 should be checked separately. For this headlight washer nozzle cover, check whether the visible part requires painting, review the bracket stiffness and screw seats, and compare the outer surface profile with the bumper opening. A direct comparison with the removed part should additionally inspect the rear reinforcement ribs, check the joint between the visible cap and hidden support, and review the clip geometry on the rear face. Before the item is accepted, compare the distance between mounting points and inspect the hose connector for ovality.
OE Identification and Side Confirmation
8Y0855276A is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-004 is the internal item code. Match both references to the vehicle record, then inspect the bumper cutout shape and surrounding contour. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-004 begins before the bumper area is disturbed: clean the hose and connector before assembly and photograph the original routing before disassembly. During trial fitting, clean the hose and connector before assembly, photograph the original routing before disassembly, and clean the hose and connector before assembly. Before returning the vehicle to service, photograph the original routing before disassembly, clean the hose and connector before assembly, and photograph the original routing before disassembly.
Receiving Inspection
When AD02010-004 arrives, receiving staff should inspect the fluid passage only with clean, non-damaging tools, match the item label to the purchase order and OE reference, and confirm the nozzle outlet is clean and unobstructed. Before workshop release, verify the cover contour against the approved product photograph, confirm that loose accessories are identified on the packing list, verify the supplied scope before discarding dividers or inner bags, and confirm the bumper-facing edge has not been compressed in transit. Complete the inspection by ensuring that staff separate mirrored components immediately after carton opening, compare the visible surface texture with the ordered specification, and inspect projecting pins before placing the item on a hard bench.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8Y0855276A |
| Cross-reference numbers | 8Y0 855 276 A 8Y0855276A |
| Internal item code | AD02010-004 |
| Vehicle brand | AUDI |
| Vehicle model | A3 |
| Model year | 2021 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Version / specification | sport version |
| Applicable vehicle | AUDI A3 2021 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8Y0855276A, please request moisture protection for sea freight, confirm sample requirements before a bulk order, and protect each nozzle outlet from dust during transit. Packing instructions should confirm pallet requirements for larger quantities, list model years and bumper versions for mixed orders, and state the required order quantity. Before dispatch, state the requested delivery schedule and request export-carton dimensions before freight booking.
Frequently Asked Questions
Why must left and right versions of 8Y0855276A be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. For item AD02010-004, the approval should check the complete supplied scope against the photographs. The same item record should also check the cap hinge or retaining point.
What information should accompany a 8Y0855276A enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. On the listed AUDI A3 2021, technicians should plug open fluid connections during packing. A workshop comparison should additionally confirm whether caps and nozzles should be supplied as pairs.
Is 8Y0855276A a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. For the right-side order line, identify project stock and service stock separately. The order review should further use dividers to prevent caps from rubbing each other.
Can product photographs alone confirm 8Y0855276A compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. The product-specific check for 8Y0855276A should verify nearby parking-sensor or trim interfaces. Receiving staff should also compare the actuator orientation behind the bumper cover.
Is a sample order available for 8Y0855276A?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. Before this headlight washer nozzle cover is accepted, state the requested delivery schedule. Before approval, the buyer or technician should check carton labels at receiving.
