8X0955102B Front Right Headlight Washer Cover Assembly for AUDI A1 2014
Primary OE reference: 8X0955102B
Cross-reference number 1: 8X0 955 102 B
Cross-reference number 2: 8X0955102B
Product type: Front Right Headlight Washer Cover Assembly
Vehicle application: AUDI A1 2014
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A1
Model year: 2014
Product function: Provides the listed washer-system replacement section for the specified front-bumper application.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-117
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8X0955102B Front Right Headlight Washer Cover Assembly Product Overview
The component shown under 8X0955102B is a front right headlight washer cover assembly intended for AUDI A1 2014. The cover assembly combines the visible cap with its supporting or retaining features so the bumper opening closes correctly. Confirm the right orientation, washer-system connection, bumper-side geometry and later version against the original vehicle part.
Fitment and Washer-System Application for A1
Compatibility for 8X0955102B should be confirmed against AUDI A1 2014 and the right installation side. The review should check the washer jet position relative to the headlamp lens, verify that the OE reference is not for the opposite side, and confirm that the vehicle is equipped with a factory headlight washer system. Use the removed part and product photographs to compare the nozzle travel direction with the vehicle-side installation, review facelift and pre-facelift washer layouts, and compare every tab, clip seat and locating shoulder; finally, compare the hose connection or cover hinge with the original part and confirm the front bumper option before ordering.
Headlight Washer Cover Assembly Function and Design Notes
The visible and hidden interfaces of AD02010-117 should be checked separately. For this headlight washer cover assembly, check the nozzle outlet orientation, review any paint-preparation requirement before fitting, and compare the support flange width. A direct comparison with the removed part should additionally inspect narrow plastic tips before installation, check the cap hinge or retaining point, and review the bracket stiffness and screw seats. Before the item is accepted, compare the distance between mounting points and inspect the base bracket around every locating slot.
OE Identification and Side Confirmation
8X0955102B is the primary OE identity for this right front right headlight washer cover assembly, while AD02010-117 is the internal item code. Match both references to the vehicle record, then confirm that the vehicle is equipped with a factory headlight washer system. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-117 begins before the bumper area is disturbed: verify that the cover closes without rubbing the bumper and photograph the original routing before disassembly. During trial fitting, retain the original fasteners unless replacements are specified, work with the washer system depressurized, and transfer reusable clips only after checking their condition. Before returning the vehicle to service, route the washer hose away from sharp edges, test the spray direction before returning the vehicle, and replace distorted clips or damaged seals.
Receiving Inspection
When AD02010-117 arrives, receiving staff should check painted or primed surfaces under neutral lighting, check the actuator body for straightness before trial installation, and protect the visible face again after inspection is complete. Before workshop release, record carton damage before the item is moved to workshop stock, compare the visible surface texture with the ordered specification, compare the supplied side with the vehicle repair order, and confirm that loose accessories are identified on the packing list. Complete the inspection by ensuring that staff verify that protective plugs remain in open fluid connections, inspect the fluid passage only with clean, non-damaging tools, and inspect the rear locator shape without forcing any movable section.
Product Technical Specifications
| Product type | Front Right Headlight Washer Cover Assembly |
|---|---|
| Primary OE reference | 8X0955102B |
| Cross-reference numbers | 8X0 955 102 B 8X0955102B |
| Internal item code | AD02010-117 |
| Vehicle brand | AUDI |
| Vehicle model | A1 |
| Model year | 2014 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Version / specification | later version |
| Applicable vehicle | AUDI A1 2014 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8X0955102B, please provide the complete destination address or port, plug open fluid connections during packing, and identify project stock and service stock separately. Packing instructions should confirm pallet requirements for larger quantities, verify the packed quantity by OE reference, and send photographs of the removed washer part. Before dispatch, protect hose spigots and projecting tabs and request barcode or private-label details when needed.
Frequently Asked Questions
Can product photographs alone confirm 8X0955102B compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. For item AD02010-117, the approval should compare the actuator orientation behind the bumper cover. The same item record should also confirm that the vehicle is equipped with a factory headlight washer system.
Which vehicle application is listed for 8X0955102B?
8X0955102B is listed for AUDI A1 2014. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. On the listed AUDI A1 2014, technicians should compare the washer opening beside the correct headlamp. A workshop comparison should additionally compare the complete OE marking with the removed washer component.
Is workshop installation recommended for 8X0955102B?
Yes. A qualified workshop can access the bumper area on the A1, transfer hoses or clips safely and test the washer system for correct operation and leaks. For the right-side order line, protect the painted bumper surface during removal. The order review should further verify that the cover closes without rubbing the bumper.
How should 8X0955102B be packed for export?
The front right headlight washer cover assembly should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. The product-specific check for 8X0955102B should confirm sample approval before mass shipment. Receiving staff should also check carton labels at receiving.
Is a sample order available for 8X0955102B?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. Before this headlight washer cover assembly is accepted, protect each nozzle outlet from dust during transit. Before approval, the buyer or technician should request moisture protection for sea freight.
