8X0955102A Front Right Headlight Washer Cover Assembly for AUDI A1 2014
Primary OE reference: 8X0955102A
Cross-reference number 1: 8X0 955 102 A
Cross-reference number 2: 8X0955102A
Product type: Front Right Headlight Washer Cover Assembly
Vehicle application: AUDI A1 2014
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A1
Model year: 2014
Product function: Provides the listed washer-system replacement section for the specified front-bumper application.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-115
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8X0955102A Front Right Headlight Washer Cover Assembly Product Overview
The component shown under 8X0955102A is a front right headlight washer cover assembly intended for AUDI A1 2014. The cover assembly combines the visible cap with its supporting or retaining features so the bumper opening closes correctly. Confirm the right orientation, washer-system connection, bumper-side geometry and early version against the original vehicle part.
Fitment and Washer-System Application for A1
Compatibility for 8X0955102A should be confirmed against AUDI A1 2014 and the right installation side. The review should compare the actuator orientation behind the bumper cover, review body-style differences within the same model generation, and review facelift and pre-facelift washer layouts. Use the removed part and product photographs to review painted, primed and unpainted finish requirements, check the washer jet position relative to the headlamp lens, and match the mounting pattern around the bumper aperture; finally, verify nearby parking-sensor or trim interfaces and compare the complete OE marking with the removed washer component.
Headlight Washer Cover Assembly Function and Design Notes
The visible and hidden interfaces of AD02010-115 should be checked separately. For this headlight washer cover assembly, compare the cap perimeter and corner radii, review the spring-loaded return features where fitted, and check the joint between the visible cap and hidden support. A direct comparison with the removed part should additionally inspect narrow plastic tips before installation, compare the retracted position with the bumper surface, and review the sealing area around the hose connection. Before the item is accepted, check the complete supplied scope against the photographs and inspect the rear reinforcement ribs.
OE Identification and Side Confirmation
8X0955102A is the primary OE identity for this right front right headlight washer cover assembly, while AD02010-115 is the internal item code. Match both references to the vehicle record, then verify the required left or right installation side. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-115 begins before the bumper area is disturbed: clean the hose and connector before assembly and work with the washer system depressurized. During trial fitting, reconnect every hose clip before filling the system, replace distorted clips or damaged seals, and protect the painted bumper surface during removal. Before returning the vehicle to service, use hand pressure rather than levering narrow plastic tabs, support the bumper cover while accessing the hidden actuator, and disconnect the fluid hose without twisting the plastic spigot.
Receiving Inspection
When AD02010-115 arrives, receiving staff should inspect the fluid passage only with clean, non-damaging tools, review the hose spigot for impact damage or distortion, and check painted or primed surfaces under neutral lighting. Before workshop release, separate mirrored components immediately after carton opening, review the production finish against the approved sample, compare the supplied side with the vehicle repair order, and compare left and right orientation before removing protective wrapping. Complete the inspection by ensuring that staff verify the supplied scope before discarding dividers or inner bags, check the cap hinge or retaining point for free movement, and measure the main mounting span when two bumper versions appear similar.
Product Technical Specifications
| Product type | Front Right Headlight Washer Cover Assembly |
|---|---|
| Primary OE reference | 8X0955102A |
| Cross-reference numbers | 8X0 955 102 A 8X0955102A |
| Internal item code | AD02010-115 |
| Vehicle brand | AUDI |
| Vehicle model | A1 |
| Model year | 2014 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Version / specification | early version |
| Applicable vehicle | AUDI A1 2014 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8X0955102A, please request moisture protection for sea freight, separate fragile actuator bodies from heavier metal parts, and confirm sample approval before mass shipment. Packing instructions should request replacement-part documentation when required, protect each nozzle outlet from dust during transit, and send photographs of the removed washer part. Before dispatch, confirm whether the visible cover needs a primed or finished surface and plug open fluid connections during packing.
Frequently Asked Questions
Why must left and right versions of 8X0955102A be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. For item AD02010-115, the approval should check each molded locator against the original component. The same item record should also check the bumper-facing surface for transport marks.
What information should accompany a 8X0955102A enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. On the listed AUDI A1 2014, technicians should plug open fluid connections during packing. A workshop comparison should additionally state the required order quantity.
What should be inspected when 8X0955102A arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. For the right-side order line, confirm that loose accessories are identified on the packing list. The order review should further review the production finish against the approved sample.
Are clips, hoses or fasteners supplied with 8X0955102A?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. The product-specific check for 8X0955102A should request moisture protection for sea freight. Receiving staff should also request moisture protection for sea freight.
How should 8X0955102A be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. Before this headlight washer cover assembly is accepted, verify the required left or right installation side. Before approval, the buyer or technician should verify the required left or right installation side.
