8X0807754 Front Right Headlight Washer Cover Assembly for AUDI A1 2014
Primary OE reference: 8X0807754
Cross-reference number 1: 8X0 807 754
Cross-reference number 2: 8X0807754
Product type: Front Right Headlight Washer Cover Assembly
Vehicle application: AUDI A1 2014
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A1
Model year: 2014
Product function: Provides the listed washer-system replacement section for the specified front-bumper application.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-113
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8X0807754 Front Right Headlight Washer Cover Assembly Product Overview
The component shown under 8X0807754 is a front right headlight washer cover assembly intended for AUDI A1 2014. The cover assembly combines the visible cap with its supporting or retaining features so the bumper opening closes correctly. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A1
Compatibility for 8X0807754 should be confirmed against AUDI A1 2014 and the right installation side. The review should separate mirrored left and right items during inventory selection, compare the washer opening beside the correct headlamp, and compare the actuator orientation behind the bumper cover. Use the removed part and product photographs to match the connector and fluid inlet position where applicable, check the washer jet position relative to the headlamp lens, and check whether the bumper is standard or sport specification; finally, retain the removed component for a direct physical comparison and compare the nozzle travel direction with the vehicle-side installation.
Headlight Washer Cover Assembly Function and Design Notes
The visible and hidden interfaces of AD02010-113 should be checked separately. For this headlight washer cover assembly, check the fluid inlet for storage contamination, review the engagement of the cover with the nozzle stem, and compare the visible bumper-side contour. A direct comparison with the removed part should additionally inspect narrow plastic tips before installation, check each molded locator against the original component, and review the hose spigot angle on the washer nozzle. Before the item is accepted, compare the depth of the actuator body and inspect the actuator barrel for impact damage.
OE Identification and Side Confirmation
8X0807754 is the primary OE identity for this right front right headlight washer cover assembly, while AD02010-113 is the internal item code. Match both references to the vehicle record, then review facelift and pre-facelift washer layouts. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-113 begins before the bumper area is disturbed: retain the original fasteners unless replacements are specified and verify that the cap remains attached through a full washer cycle. During trial fitting, retain the original fasteners unless replacements are specified, verify that the cap remains attached through a full washer cycle, and retain the original fasteners unless replacements are specified. Before returning the vehicle to service, verify that the cap remains attached through a full washer cycle, retain the original fasteners unless replacements are specified, and verify that the cap remains attached through a full washer cycle.
Receiving Inspection
When AD02010-113 arrives, receiving staff should retain the OE label until the washer system has passed its function test, verify that protective plugs remain in open fluid connections, and confirm that small seals or clips have not remained in the wrapping. Before workshop release, measure the main mounting span when two bumper versions appear similar, document any shortage before the receiving inspection is closed, compare the supplied side with the vehicle repair order, and inspect the visible cover face for scratches or pressure marks. Complete the inspection by ensuring that staff review the hose spigot for impact damage or distortion, check the spring-return area where the component includes an actuator, and record carton damage before the item is moved to workshop stock.
Product Technical Specifications
| Product type | Front Right Headlight Washer Cover Assembly |
|---|---|
| Primary OE reference | 8X0807754 |
| Cross-reference numbers | 8X0 807 754 8X0807754 |
| Internal item code | AD02010-113 |
| Vehicle brand | AUDI |
| Vehicle model | A1 |
| Model year | 2014 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A1 2014 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8X0807754, please separate left and right items on the packing list, request replacement-part documentation when required, and confirm the preferred incoterm. Packing instructions should plug open fluid connections during packing, confirm the acceptable delivery window, and provide the consignee and freight-forwarder details. Before dispatch, protect hose spigots and projecting tabs and identify painted and unpainted variants on separate lines.
Frequently Asked Questions
Which side uses 8X0807754?
This front right headlight washer cover assembly is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. For item AD02010-113, the approval should check the cap hinge or retaining point. The same item record should also check the fluid inlet for storage contamination.
Does the finish specification matter for 8X0807754?
Yes. A visible headlight washer cover assembly may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. On the listed AUDI A1 2014, technicians should review the engagement of the cover with the nozzle stem. A workshop comparison should additionally inspect the telescopic body for smooth movement.
How should 8X0807754 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. For the right-side order line, verify nearby parking-sensor or trim interfaces. The order review should further separate mirrored left and right items during inventory selection.
Should the washer system be tested after fitting 8X0807754?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. The product-specific check for 8X0807754 should transfer reusable clips only after checking their condition. Receiving staff should also keep dirt out of open washer-fluid lines.
Is a sample order available for 8X0807754?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. Before this headlight washer cover assembly is accepted, check carton labels at receiving. Before approval, the buyer or technician should provide the complete destination address or port.
