8X0807753 Front Left Headlight Washer Cover Assembly for AUDI A1 2014
Primary OE reference: 8X0807753
Cross-reference number 1: 8X0 807 753
Cross-reference number 2: 8X0807753
Product type: Front Left Headlight Washer Cover Assembly
Vehicle application: AUDI A1 2014
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A1
Model year: 2014
Product function: Provides the listed washer-system replacement section for the specified front-bumper application.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-112
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8X0807753 Front Left Headlight Washer Cover Assembly Product Overview
The component shown under 8X0807753 is a front left headlight washer cover assembly intended for AUDI A1 2014. The cover assembly combines the visible cap with its supporting or retaining features so the bumper opening closes correctly. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A1
Compatibility for 8X0807753 should be confirmed against AUDI A1 2014 and the left installation side. The review should inspect the bumper cutout shape and surrounding contour, compare the nozzle travel direction with the vehicle-side installation, and confirm that the listed model designation matches the vehicle. Use the removed part and product photographs to review body-style differences within the same model generation, check the washer jet position relative to the headlamp lens, and compare the complete OE marking with the removed washer component; finally, verify the required left or right installation side and compare the washer opening beside the correct headlamp.
Headlight Washer Cover Assembly Function and Design Notes
The visible and hidden interfaces of AD02010-112 should be checked separately. For this headlight washer cover assembly, compare the retracted position with the bumper surface, inspect the telescopic body for smooth movement, and check the fluid inlet for storage contamination. A direct comparison with the removed part should additionally review the left-to-right mirrored geometry, compare the cap perimeter and corner radii, and inspect the molded tabs for cracks or distortion. Before the item is accepted, check the nozzle outlet orientation and review the sealing area around the hose connection.
OE Identification and Side Confirmation
8X0807753 is the primary OE identity for this left front left headlight washer cover assembly, while AD02010-112 is the internal item code. Match both references to the vehicle record, then confirm the destination-market equipment specification. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-112 begins before the bumper area is disturbed: keep dirt out of open washer-fluid lines and photograph the original routing before disassembly. During trial fitting, align the cover flush with the bumper surface, follow the vehicle workshop procedure for bumper removal, and check the headlamp lens receives an even spray. Before returning the vehicle to service, trial-fit the component before final fastening, tighten bracket hardware only after alignment, and test for drips after the washer pump stops.
Receiving Inspection
When AD02010-112 arrives, receiving staff should confirm the nozzle outlet is clean and unobstructed, measure the main mounting span when two bumper versions appear similar, and confirm the bumper-facing edge has not been compressed in transit. Before workshop release, review the hose spigot for impact damage or distortion, confirm the internal item code before mixed stock is shelved, photograph the received item if the vehicle fitment is still pending, and compare left and right orientation before removing protective wrapping. Complete the inspection by ensuring that staff check the carton partition for evidence of part-to-part contact, retain the OE label until the washer system has passed its function test, and verify the cover contour against the approved product photograph.
Product Technical Specifications
| Product type | Front Left Headlight Washer Cover Assembly |
|---|---|
| Primary OE reference | 8X0807753 |
| Cross-reference numbers | 8X0 807 753 8X0807753 |
| Internal item code | AD02010-112 |
| Vehicle brand | AUDI |
| Vehicle model | A1 |
| Model year | 2014 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A1 2014 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8X0807753, please confirm sample approval before mass shipment, confirm sample requirements before a bulk order, and confirm sample approval before mass shipment. Packing instructions should confirm sample requirements before a bulk order, confirm sample approval before mass shipment, and confirm sample requirements before a bulk order. Before dispatch, confirm sample approval before mass shipment and confirm sample requirements before a bulk order.
Frequently Asked Questions
Can 8X0807753 fit every A1 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For item AD02010-112, the approval should check whether the original cover is supplied separately from its support. The same item record should also confirm the destination-market equipment specification.
Does the finish specification matter for 8X0807753?
Yes. A visible headlight washer cover assembly may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. On the listed AUDI A1 2014, technicians should inspect the telescopic body for smooth movement. A workshop comparison should additionally review the clip geometry on the rear face.
Can product photographs alone confirm 8X0807753 compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. For the left-side order line, verify nearby parking-sensor or trim interfaces. The order review should further compare the hose connection or cover hinge with the original part.
Why must left and right versions of 8X0807753 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. The product-specific check for 8X0807753 should check the complete supplied scope against the photographs. Receiving staff should also compare the depth of the actuator body.
What information should accompany a 8X0807753 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. Before this headlight washer cover assembly is accepted, check carton labels at receiving. Before approval, the buyer or technician should protect hose spigots and projecting tabs.
