8W0955275+787 Front Left Headlight Washer Cover Assembly for AUDI A4 2016
Primary OE reference: 8W0955275+787
Cross-reference number 1: 8W0 955 275+787
Cross-reference number 2: 8W0955275+787
Cross-reference number 3: 8W0955275787
Product type: Front Left Headlight Washer Cover Assembly
Vehicle application: AUDI A4 2016
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A4
Model year: 2016
Product function: Provides the listed washer-system replacement section for the specified front-bumper application.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-025
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8W0955275+787 Front Left Headlight Washer Cover Assembly Product Overview
The component shown under 8W0955275+787 is a front left headlight washer cover assembly intended for AUDI A4 2016. The cover assembly combines the visible cap with its supporting or retaining features so the bumper opening closes correctly. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A4
Compatibility for 8W0955275+787 should be confirmed against AUDI A4 2016 and the left installation side. The review should review painted, primed and unpainted finish requirements, compare product photographs with the removed part from several angles, and check whether the bumper is standard or sport specification. Use the removed part and product photographs to compare the actuator orientation behind the bumper cover, compare every tab, clip seat and locating shoulder, and confirm that the vehicle is equipped with a factory headlight washer system; finally, check the production date where model-year transitions overlap and verify nearby parking-sensor or trim interfaces.
Headlight Washer Cover Assembly Function and Design Notes
The visible and hidden interfaces of AD02010-025 should be checked separately. For this headlight washer cover assembly, review the hose spigot angle on the washer nozzle, check whether the visible part requires painting, and inspect the hose connector for ovality. A direct comparison with the removed part should additionally compare the cap-to-support engagement method, review the engagement of the cover with the nozzle stem, and check the cap hinge or retaining point. Before the item is accepted, inspect the rear reinforcement ribs and compare the retracted position with the bumper surface.
OE Identification and Side Confirmation
8W0955275+787 is the primary OE identity for this left front left headlight washer cover assembly, while AD02010-025 is the internal item code. Match both references to the vehicle record, then compare the hose connection or cover hinge with the original part. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-025 begins before the bumper area is disturbed: compare the installed height with the opposite side and confirm that the nozzle extends and retracts freely. During trial fitting, test for drips after the washer pump stops, clean the hose and connector before assembly, and confirm that no hose is pinched behind the bumper. Before returning the vehicle to service, tighten bracket hardware only after alignment, work with the washer system depressurized, and inspect nearby wiring and sensors before refitting trim.
Receiving Inspection
When AD02010-025 arrives, receiving staff should inspect the rear locator shape without forcing any movable section, compare connector depth and hose angle with the retained original part, and separate mirrored components immediately after carton opening. Before workshop release, confirm that small seals or clips have not remained in the wrapping, check the carton partition for evidence of part-to-part contact, protect the visible face again after inspection is complete, and review the hose spigot for impact damage or distortion. Complete the inspection by ensuring that staff confirm that loose accessories are identified on the packing list, inspect mounting holes for flash, blockage or edge damage, and check the cap hinge or retaining point for free movement.
Product Technical Specifications
| Product type | Front Left Headlight Washer Cover Assembly |
|---|---|
| Primary OE reference | 8W0955275+787 |
| Cross-reference numbers | 8W0 955 275+787 8W0955275+787 8W0955275787 |
| Internal item code | AD02010-025 |
| Vehicle brand | AUDI |
| Vehicle model | A4 |
| Model year | 2016 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A4 2016 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8W0955275+787, please identify painted and unpainted variants on separate lines, protect each nozzle outlet from dust during transit, and state the required order quantity. Packing instructions should provide the complete destination address or port, send photographs of the removed washer part, and include the full OE reference on the purchase order. Before dispatch, identify the required installation side and confirm whether the visible cover needs a primed or finished surface.
Frequently Asked Questions
What should be inspected when 8W0955275+787 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. For item AD02010-025, the approval should review the production finish against the approved sample. The same item record should also protect the visible face again after inspection is complete.
Is workshop installation recommended for 8W0955275+787?
Yes. A qualified workshop can access the bumper area on the A4, transfer hoses or clips safely and test the washer system for correct operation and leaks. On the listed AUDI A4 2016, technicians should check the system for leaks after reconnection. A workshop comparison should additionally confirm that no hose is pinched behind the bumper.
Which side uses 8W0955275+787?
This front left headlight washer cover assembly is catalogued for the left side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. For the left-side order line, check the bumper-facing surface for transport marks. The order review should further check each molded locator against the original component.
Why must left and right versions of 8W0955275+787 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. The product-specific check for 8W0955275+787 should compare the depth of the actuator body. Receiving staff should also check each molded locator against the original component.
Should the washer system be tested after fitting 8W0955275+787?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. Before this headlight washer cover assembly is accepted, retain the original fasteners unless replacements are specified. Before approval, the buyer or technician should clean the hose and connector before assembly.
