8W0955102A Front Right Headlight Washer Nozzle for AUDI A4 2016
Primary OE reference: 8W0955102A
Cross-reference number 1: 8W0 955 102A
Cross-reference number 2: 8W0955102A
Product type: Front Right Headlight Washer Nozzle
Vehicle application: AUDI A4 2016
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A4
Model year: 2016
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-020
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8W0955102A Front Right Headlight Washer Nozzle Product Overview
The component shown under 8W0955102A is a front right headlight washer nozzle intended for AUDI A4 2016. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A4
Compatibility for 8W0955102A should be confirmed against AUDI A4 2016 and the right installation side. The review should compare the nozzle travel direction with the vehicle-side installation, verify nearby parking-sensor or trim interfaces, and match the connector and fluid inlet position where applicable. Use the removed part and product photographs to confirm that the listed model designation matches the vehicle, compare every tab, clip seat and locating shoulder, and check whether the original cover is supplied separately from its support; finally, review body-style differences within the same model generation and compare product photographs with the removed part from several angles.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-020 should be checked separately. For this headlight washer nozzle, review the clip geometry on the rear face, check the fluid inlet for storage contamination, and inspect the rear reinforcement ribs. A direct comparison with the removed part should additionally compare the support flange width, review the bracket stiffness and screw seats, and check the complete supplied scope against the photographs. Before the item is accepted, inspect the telescopic body for smooth movement and compare the cap-to-support engagement method.
OE Identification and Side Confirmation
8W0955102A is the primary OE identity for this right front right headlight washer nozzle, while AD02010-020 is the internal item code. Match both references to the vehicle record, then compare the actuator orientation behind the bumper cover. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-020 begins before the bumper area is disturbed: photograph the original routing before disassembly and transfer reusable clips only after checking their condition. During trial fitting, replace distorted clips or damaged seals, check that the washer unit is fully seated in its guide, and confirm that no hose is pinched behind the bumper. Before returning the vehicle to service, align the cover flush with the bumper surface, verify that the cap remains attached through a full washer cycle, and reconnect every hose clip before filling the system.
Receiving Inspection
When AD02010-020 arrives, receiving staff should inspect mounting holes for flash, blockage or edge damage, protect the visible face again after inspection is complete, and separate mirrored components immediately after carton opening. Before workshop release, confirm the nozzle outlet is clean and unobstructed, check the actuator body for straightness before trial installation, check the spring-return area where the component includes an actuator, and measure the main mounting span when two bumper versions appear similar. Complete the inspection by ensuring that staff check painted or primed surfaces under neutral lighting, verify the nozzle head returns smoothly without applying excess force, and confirm the bumper-facing edge has not been compressed in transit.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 8W0955102A |
| Cross-reference numbers | 8W0 955 102A 8W0955102A |
| Internal item code | AD02010-020 |
| Vehicle brand | AUDI |
| Vehicle model | A4 |
| Model year | 2016 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A4 2016 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8W0955102A, please identify the required installation side, check carton labels at receiving, and request replacement-part documentation when required. Packing instructions should protect hose spigots and projecting tabs, confirm pallet requirements for larger quantities, and provide the complete destination address or port. Before dispatch, confirm whether caps and nozzles should be supplied as pairs and confirm sample approval before mass shipment.
Frequently Asked Questions
What information should accompany a 8W0955102A enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. For item AD02010-020, the approval should include the full OE reference on the purchase order. The same item record should also use dividers to prevent caps from rubbing each other.
Is 8W0955102A a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. On the listed AUDI A4 2016, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally protect hose spigots and projecting tabs.
Does the finish specification matter for 8W0955102A?
Yes. A visible headlight washer nozzle may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. For the right-side order line, check the cap hinge or retaining point. The order review should further check whether the visible part requires painting.
How should 8W0955102A be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. The product-specific check for 8W0955102A should confirm whether a cap, nozzle, bracket or complete assembly is required. Receiving staff should also use the full OE number, not a partial family reference.
Which side uses 8W0955102A?
This front right headlight washer nozzle is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. Before this headlight washer nozzle is accepted, compare the depth of the actuator body. Before approval, the buyer or technician should check the fluid inlet for storage contamination.
