8W0 945 106D Rear Bumper Light for AUDI A4 2016 Right
Primary OE reference: 8W0 945 106D
Product type: Rear Bumper Light
Applicable vehicle: AUDI A4 2016
Installation position: Rear bumper / reflector opening
Side / orientation: Right
Brand: AUDI
Model: A4
Vehicle year: 2016
Bumper interface: Match the lens perimeter and rear support geometry rather than relying on colour or overall appearance alone.
Product function: Rear-bumper lighting improves low-mounted vehicle visibility; reflector-only versions return light without an electrical connection.
Connector review: If the original unit is powered, compare the socket, terminal count, cable exit and locking tab before installation.
Fitting note: After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
Selection context: Check whether the bumper carries a plain reflector or an illuminated unit before approving the replacement.
Post-fit check: Reinstall the liner only after the housing is secure and the cable, if fitted, has adequate clearance.
Trade-order details: Trade enquiries should include the vehicle year, model, bumper position and destination market for accurate picking.
Packing reference: Projecting tabs should be supported with shaped material instead of carrying the weight of other products.
8W0 945 106D Rear Bumper Light Overview
This product is listed for AUDI A4 2016 at the right rear-bumper position. The part occupies a vehicle-specific bumper opening and may function as a reflector, rear fog lamp or auxiliary marker.
Use the removed component as the physical reference for outer shape, housing projection and clip location.
At the right rear-bumper position, check the rear housing projection against the space behind the bumper skin to keep the optical face level with the surrounding painted surface.
Rear-Bumper Geometry Review
Check the bumper recess, outer contour and clip orientation; similar reflectors can use different hidden mounts.
Bumper designs can change during a model cycle, so verify the lens face and hidden support points together.
When reviewing the 2016 vehicle, compare the bumper corner radius with the product face from more than one viewing angle before any modification is made to the bumper or replacement part.
For the AUDI A4 application, align each locating tab with the matching slot before applying hand pressure before deciding whether original hardware is suitable for reuse.
Lens, Housing and Harness Comparison
If the original unit is powered, compare the socket, terminal count, cable exit and locking tab before installation.
Do not polish or modify the lens before fitment confirmation; altered parts are harder to compare accurately.
For this A4 body configuration, check whether the original component uses a separate retainer or an integral locking tab because facelift bumpers can retain the same vehicle name with different apertures.
Before approving the A4 part for packing, verify the fastener direction and the shape of the concealed support frame so left- and right-hand stock cannot be mixed during consolidation.
Installation Completion
After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
Make sure the component does not touch hot exhaust trim or trap wiring against a sharp body edge.
Before fitting the right unit, protect the visible surface until the full perimeter gap has been accepted so the approved product can be picked consistently in a mixed wholesale order.
While the AUDI bumper opening is accessible, review the reflector texture and lens colour in neutral workshop light so hidden brackets are not loaded or bent during installation.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 8W0 945 106D |
| Cross-reference numbers | 8W0 945 106D |
| Internal item code | AD04004-020 |
| Vehicle brand | AUDI |
| Vehicle model | A4 |
| Model year | 2016 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Right |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
Confirm the required quantity and packaging method; exposed lens faces and projecting tabs need separate protection.
Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.
During comparison of the AUDI rear component, record the approved side and vehicle application for repeat-order identification to preserve access for a final electrical test where a lamp circuit is present.
For a repeat order of the right version, confirm that the cable exit, where fitted, clears the bumper reinforcement to reduce clip damage during a no-force trial installation.
Frequently Asked Questions
What if the bumper opening differs?
Stop the installation and compare market version, trim level and hidden mounting geometry before modifying any part.
Should original clips be reused?
Reuse hardware only when it is undamaged and correct for the photographed housing; replace distorted retainers.
When should photographs be supplied?
Send front, rear and bumper-opening images when the original marking is unclear or several versions share the vehicle name.
How is a passive reflector checked?
Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.
Can the opposite side use the same part?
Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.
Request a Product-Specific Quote
The quotation can include export packing requirements once the required variant and order volume are known.
