8V5955276B Front Right Headlight Washer Nozzle Cover for AUDI A3 2017
Primary OE reference: 8V5955276B
Cross-reference number 1: 8V5 955 276B
Cross-reference number 2: 8V5955276B
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI A3 2017
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A3
Model year: 2017
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-008
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8V5955276B Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 8V5955276B is a front right headlight washer nozzle cover intended for AUDI A3 2017. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry and hatchback / sedan application against the original vehicle part.
Fitment and Washer-System Application for A3
Compatibility for 8V5955276B should be confirmed against AUDI A3 2017 and the right installation side. The review should check regional variations in headlamp-cleaning equipment, check whether the bumper is standard or sport specification, and confirm that the listed model designation matches the vehicle. Use the removed part and product photographs to match the mounting pattern around the bumper aperture, compare product photographs with the removed part from several angles, and confirm whether a cap, nozzle, bracket or complete assembly is required; finally, separate mirrored left and right items during inventory selection and review painted, primed and unpainted finish requirements.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-008 should be checked separately. For this headlight washer nozzle cover, check the fluid inlet for storage contamination, review the hose spigot angle on the washer nozzle, and compare the cap perimeter and corner radii. A direct comparison with the removed part should additionally inspect the rear reinforcement ribs, check the nozzle outlet orientation, and review any paint-preparation requirement before fitting. Before the item is accepted, compare the support flange width and inspect narrow plastic tips before installation.
OE Identification and Side Confirmation
8V5955276B is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-008 is the internal item code. Match both references to the vehicle record, then retain the removed component for a direct physical comparison. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-008 begins before the bumper area is disturbed: align the cover flush with the bumper surface and check the system for leaks after reconnection. During trial fitting, clean the hose and connector before assembly, verify that the cap remains attached through a full washer cycle, and keep dirt out of open washer-fluid lines. Before returning the vehicle to service, paint or finish visible covers before final installation when required, reconnect every hose clip before filling the system, and test for drips after the washer pump stops.
Receiving Inspection
When AD02010-008 arrives, receiving staff should review the production finish against the approved sample, check molded tabs for whitening, cracks or transport stress, and compare connector depth and hose angle with the retained original part. Before workshop release, inspect projecting pins before placing the item on a hard bench, inspect the visible cover face for scratches or pressure marks, verify the supplied scope before discarding dividers or inner bags, and confirm that small seals or clips have not remained in the wrapping. Complete the inspection by ensuring that staff match the item label to the purchase order and OE reference, check painted or primed surfaces under neutral lighting, and check the actuator body for straightness before trial installation.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8V5955276B |
| Cross-reference numbers | 8V5 955 276B 8V5955276B |
| Internal item code | AD02010-008 |
| Vehicle brand | AUDI |
| Vehicle model | A3 |
| Model year | 2017 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Version / specification | hatchback / sedan application |
| Applicable vehicle | AUDI A3 2017 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8V5955276B, please identify project stock and service stock separately, confirm pallet requirements for larger quantities, and verify the packed quantity by OE reference. Packing instructions should send photographs of the removed washer part, protect hose spigots and projecting tabs, and request barcode or private-label details when needed. Before dispatch, state the requested delivery schedule and request replacement-part documentation when required.
Frequently Asked Questions
Is a sample order available for 8V5955276B?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. For item AD02010-008, the approval should protect hose spigots and projecting tabs. The same item record should also state the target vehicle application.
Why must left and right versions of 8V5955276B be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. On the listed AUDI A3 2017, technicians should inspect the base bracket around every locating slot. A workshop comparison should additionally inspect the base bracket around every locating slot.
Is 8V5955276B a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. For the right-side order line, protect hose spigots and projecting tabs. The order review should further use dividers to prevent caps from rubbing each other.
Does the finish specification matter for 8V5955276B?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. The product-specific check for 8V5955276B should compare the visible bumper-side contour. Receiving staff should also compare the distance between mounting points.
What should be inspected when 8V5955276B arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. Before this headlight washer nozzle cover is accepted, review the production finish against the approved sample. Before approval, the buyer or technician should retain the OE label until the washer system has passed its function test.
