8V5955275 Front Left Headlight Washer Nozzle Cover for AUDI A3 2014
Primary OE reference: 8V5955275
Cross-reference number 1: 8V5 955 275
Cross-reference number 2: 8V5955275
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI A3 2014
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A3
Model year: 2014
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-011
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8V5955275 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 8V5955275 is a front left headlight washer nozzle cover intended for AUDI A3 2014. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry and sedan application against the original vehicle part.
Fitment and Washer-System Application for A3
Compatibility for 8V5955275 should be confirmed against AUDI A3 2014 and the left installation side. The review should match the mounting pattern around the bumper aperture, compare the hose connection or cover hinge with the original part, and check the production date where model-year transitions overlap. Use the removed part and product photographs to retain the removed component for a direct physical comparison, confirm whether a cap, nozzle, bracket or complete assembly is required, and compare the actuator orientation behind the bumper cover; finally, verify that the OE reference is not for the opposite side and inspect the bumper cutout shape and surrounding contour.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-011 should be checked separately. For this headlight washer nozzle cover, inspect the molded tabs for cracks or distortion, compare the outer surface profile with the bumper opening, and review the spring-loaded return features where fitted. A direct comparison with the removed part should additionally check whether the visible part requires painting, inspect the washer outlet for blockage, and compare the cap perimeter and corner radii. Before the item is accepted, review any paint-preparation requirement before fitting and check the cap hinge or retaining point.
OE Identification and Side Confirmation
8V5955275 is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-011 is the internal item code. Match both references to the vehicle record, then check whether the original cover is supplied separately from its support. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-011 begins before the bumper area is disturbed: test for drips after the washer pump stops and protect the painted bumper surface during removal. During trial fitting, avoid forcing a mirrored part into the bumper opening, inspect nearby wiring and sensors before refitting trim, and photograph the original routing before disassembly. Before returning the vehicle to service, transfer reusable clips only after checking their condition, replace distorted clips or damaged seals, and check that the washer unit is fully seated in its guide.
Receiving Inspection
When AD02010-011 arrives, receiving staff should verify the supplied scope before discarding dividers or inner bags, inspect the fluid passage only with clean, non-damaging tools, and photograph the received item if the vehicle fitment is still pending. Before workshop release, inspect the visible cover face for scratches or pressure marks, verify that protective plugs remain in open fluid connections, compare left and right orientation before removing protective wrapping, and inspect projecting pins before placing the item on a hard bench. Complete the inspection by ensuring that staff confirm that loose accessories are identified on the packing list, check the carton partition for evidence of part-to-part contact, and compare connector depth and hose angle with the retained original part.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8V5955275 |
| Cross-reference numbers | 8V5 955 275 8V5955275 |
| Internal item code | AD02010-011 |
| Vehicle brand | AUDI |
| Vehicle model | A3 |
| Model year | 2014 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Version / specification | sedan application |
| Applicable vehicle | AUDI A3 2014 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8V5955275, please send photographs of the removed washer part, identify project stock and service stock separately, and state any outer-carton marking requirements. Packing instructions should separate left and right items on the packing list, provide the consignee and freight-forwarder details, and protect each nozzle outlet from dust during transit. Before dispatch, request export-carton dimensions before freight booking and use dividers to prevent caps from rubbing each other.
Frequently Asked Questions
How should 8V5955275 be packed for export?
The front left headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For item AD02010-011, the approval should provide the complete destination address or port. The same item record should also confirm sample approval before mass shipment.
Why must left and right versions of 8V5955275 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. On the listed AUDI A3 2014, technicians should review any paint-preparation requirement before fitting. A workshop comparison should additionally review the hose spigot angle on the washer nozzle.
Is a sample order available for 8V5955275?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. For the left-side order line, list model years and bumper versions for mixed orders. The order review should further use dividers to prevent caps from rubbing each other.
Which side uses 8V5955275?
This front left headlight washer nozzle cover is catalogued for the left side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. The product-specific check for 8V5955275 should review the engagement of the cover with the nozzle stem. Receiving staff should also review the sealing area around the hose connection.
Should the washer system be tested after fitting 8V5955275?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. Before this headlight washer nozzle cover is accepted, test the spray direction before returning the vehicle. Before approval, the buyer or technician should test the spray direction before returning the vehicle.
