8V0 807 550B Bumper Energy Absorber for AUDI A3 2017 Front
Primary OE reference: 8V0 807 550B
Product type: Bumper Energy Absorber
Applicable vehicle: AUDI A3 2017
Installation position: Front bumper
Brand: AUDI
Model: A3
Vehicle year: 2017
Physical comparison: Confirm the left and right end brackets for 8V0 807 550B face the correct direction and sit square against the body mounting faces.
Component design: Vehicle production changes may alter beam section, for 8V0 807 550B support plates or mounting holes even when the model name is unchanged.
Installation guidance: Dry-fit the replacement with every bolt started for 8V0 807 550B by hand, then check fascia and under-panel clearance before final tightening.
Wholesale enquiry: State whether the requirement is a metal for 8V0 807 550B reinforcement or foam energy absorber so the correct product form is selected.
8V0 807 550B Bumper Energy Absorber Overview
This 8V0 807 550B listing covers the front bumper energy absorber for AUDI A3 2017. Its photographed mounting form identifies the supplied version.
This replacement part is catalogued by OE for 8V0 807 550B reference, vehicle generation and front/rear location rather than appearance alone.
OE Identification and Vehicle Match
Inspect the interface behind the bumper cover, for 8V0 807 550B including mounting ears and clearance around adjacent supports.
Confirm 8V0 807 550B against the production period and front bumper location. Similar covers on AUDI A3 2017 can conceal different support sections.
Hidden Bumper Support Geometry
A correctly selected beam preserves the intended for 8V0 807 550B mounting relationship between the bumper cover and body structure.
Lay the original and replacement parts on for 8V0 807 550B a flat surface to compare curvature, flange angle and overall reach.
Mounting Sequence
After mounting, confirm clearance to lamps, cooling for 8V0 807 550B ducts, exhaust components or lower shields applicable to that location.
Before installing 8V0 807 550B, a qualified repair professional should assess collision distortion at the AUDI A3 2017 mounting faces.
Automotive Component Specifications
| Product type | Bumper Energy Absorber |
|---|---|
| Primary OE reference | 8V0 807 550B |
| Cross-reference numbers | 8V0 807 550B |
| Internal item code | AD03004-004 |
| Vehicle brand | AUDI |
| Vehicle model | A3 |
| Model year | 2017 |
| Installation position | Front bumper |
Trade Ordering Notes
Include production year and market version in for 8V0 807 550B the enquiry when an OE catalogue lists a transition part.
Frequently Asked Questions
How is 8V0 807 550B fitment verified?
Confirm 8V0 807 550B against AUDI A3 2017, the front position and the complete mounting geometry shown in the product photo.
Which physical points should be compared?
Verify the centreline, side-to-side symmetry and distance for 8V0 807 550B from the body flange to the outer beam surface.
Is 8V0 807 550B a universal bumper component?
No. The 8V0 807 550B span, absorber profile, brackets and mounting points are specific to AUDI A3 2017.
What preparation is recommended for 8V0 807 550B?
Confirm the stated front or rear orientation, for 8V0 807 550B loosely align both ends and inspect the centre section before final fastening.
Which details support a 8V0 807 550B trade quotation?
Sampling should be approved against OE reference, for 8V0 807 550B mounting geometry and front/rear position before bulk release.
Need a quotation for 8V0 807 550B? Contact Yongshang Auto with vehicle, bumper position, quantity and destination.
