8U0955276E Front Right Headlight Washer Nozzle Cover for AUDI Q3 2016
Primary OE reference: 8U0955276E
Cross-reference number 1: 8U0 955 276E
Cross-reference number 2: 8U0955276E
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI Q3 2016
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: Q3
Model year: 2016
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-085
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8U0955276E Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 8U0955276E is a front right headlight washer nozzle cover intended for AUDI Q3 2016. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q3
Compatibility for 8U0955276E should be confirmed against AUDI Q3 2016 and the right installation side. The review should compare the washer opening beside the correct headlamp, inspect the bumper cutout shape and surrounding contour, and review body-style differences within the same model generation. Use the removed part and product photographs to verify the required left or right installation side, confirm whether a cap, nozzle, bracket or complete assembly is required, and confirm that the listed model designation matches the vehicle; finally, compare the complete OE marking with the removed washer component and compare the hose connection or cover hinge with the original part.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-085 should be checked separately. For this headlight washer nozzle cover, inspect the molded tabs for cracks or distortion, compare the depth of the actuator body, and review the bracket stiffness and screw seats. A direct comparison with the removed part should additionally check the nozzle outlet orientation, inspect the washer outlet for blockage, and compare the visible bumper-side contour. Before the item is accepted, review the sealing area around the hose connection and check the joint between the visible cap and hidden support.
OE Identification and Side Confirmation
8U0955276E is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-085 is the internal item code. Match both references to the vehicle record, then verify nearby parking-sensor or trim interfaces. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-085 begins before the bumper area is disturbed: complete a final visual check under even lighting and keep dirt out of open washer-fluid lines. During trial fitting, disconnect the fluid hose without twisting the plastic spigot, check that the washer unit is fully seated in its guide, and route the washer hose away from sharp edges. Before returning the vehicle to service, verify that the cover closes without rubbing the bumper, avoid forcing a mirrored part into the bumper opening, and inspect the bumper opening after the trial fit.
Receiving Inspection
When AD02010-085 arrives, receiving staff should separate mirrored components immediately after carton opening, confirm that small seals or clips have not remained in the wrapping, and check the carton partition for evidence of part-to-part contact. Before workshop release, protect the visible face again after inspection is complete, review the hose spigot for impact damage or distortion, confirm that loose accessories are identified on the packing list, and inspect mounting holes for flash, blockage or edge damage. Complete the inspection by ensuring that staff check the cap hinge or retaining point for free movement, inspect projecting pins before placing the item on a hard bench, and document any shortage before the receiving inspection is closed.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8U0955276E |
| Cross-reference numbers | 8U0 955 276E 8U0955276E |
| Internal item code | AD02010-085 |
| Vehicle brand | AUDI |
| Vehicle model | Q3 |
| Model year | 2016 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI Q3 2016 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8U0955276E, please plug open fluid connections during packing, protect hose spigots and projecting tabs, and confirm sample requirements before a bulk order. Packing instructions should list model years and bumper versions for mixed orders, request export-carton dimensions before freight booking, and state the target vehicle application. Before dispatch, confirm whether caps and nozzles should be supplied as pairs and identify project stock and service stock separately.
Frequently Asked Questions
What information should accompany a 8U0955276E enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. For item AD02010-085, the approval should separate left and right items on the packing list. The same item record should also state the requested delivery schedule.
Can product photographs alone confirm 8U0955276E compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. On the listed AUDI Q3 2016, technicians should check the washer jet position relative to the headlamp lens. A workshop comparison should additionally verify nearby parking-sensor or trim interfaces.
How should 8U0955276E be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. For the right-side order line, verify nearby parking-sensor or trim interfaces. The order review should further compare the hose connection or cover hinge with the original part.
Can 8U0955276E fit every Q3 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. The product-specific check for 8U0955276E should compare the nozzle travel direction with the vehicle-side installation. Receiving staff should also use the full OE number, not a partial family reference.
Is 8U0955276E a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. Before this headlight washer nozzle cover is accepted, state the target vehicle application. Before approval, the buyer or technician should use dividers to prevent caps from rubbing each other.
