8U0955275E Front Left Headlight Washer Nozzle Cover for AUDI Q3 2016
Primary OE reference: 8U0955275E
Cross-reference number 1: 8U0 955 275E
Cross-reference number 2: 8U0955275E
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI Q3 2016
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: Q3
Model year: 2016
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-084
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8U0955275E Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 8U0955275E is a front left headlight washer nozzle cover intended for AUDI Q3 2016. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q3
Compatibility for 8U0955275E should be confirmed against AUDI Q3 2016 and the left installation side. The review should separate mirrored left and right items during inventory selection, compare the washer opening beside the correct headlamp, and compare the actuator orientation behind the bumper cover. Use the removed part and product photographs to match the connector and fluid inlet position where applicable, check the washer jet position relative to the headlamp lens, and check whether the bumper is standard or sport specification; finally, retain the removed component for a direct physical comparison and compare the nozzle travel direction with the vehicle-side installation.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-084 should be checked separately. For this headlight washer nozzle cover, compare the cap perimeter and corner radii, inspect the telescopic body for smooth movement, and check whether the visible part requires painting. A direct comparison with the removed part should additionally review the bracket stiffness and screw seats, compare the outer surface profile with the bumper opening, and inspect the rear reinforcement ribs. Before the item is accepted, check the joint between the visible cap and hidden support and review the clip geometry on the rear face.
OE Identification and Side Confirmation
8U0955275E is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-084 is the internal item code. Match both references to the vehicle record, then review facelift and pre-facelift washer layouts. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-084 begins before the bumper area is disturbed: verify that the cover closes without rubbing the bumper and check the system for leaks after reconnection. During trial fitting, verify that the cover closes without rubbing the bumper, check the system for leaks after reconnection, and verify that the cover closes without rubbing the bumper. Before returning the vehicle to service, check the system for leaks after reconnection, verify that the cover closes without rubbing the bumper, and check the system for leaks after reconnection.
Receiving Inspection
When AD02010-084 arrives, receiving staff should check painted or primed surfaces under neutral lighting, inspect mounting holes for flash, blockage or edge damage, and retain the OE label until the washer system has passed its function test. Before workshop release, verify that protective plugs remain in open fluid connections, confirm that small seals or clips have not remained in the wrapping, measure the main mounting span when two bumper versions appear similar, and document any shortage before the receiving inspection is closed. Complete the inspection by ensuring that staff compare the supplied side with the vehicle repair order, inspect the visible cover face for scratches or pressure marks, and review the hose spigot for impact damage or distortion.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8U0955275E |
| Cross-reference numbers | 8U0 955 275E 8U0955275E |
| Internal item code | AD02010-084 |
| Vehicle brand | AUDI |
| Vehicle model | Q3 |
| Model year | 2016 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI Q3 2016 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8U0955275E, please provide the complete destination address or port, separate fragile actuator bodies from heavier metal parts, and state the target vehicle application. Packing instructions should send photographs of the removed washer part, use dividers to prevent caps from rubbing each other, and confirm whether caps and nozzles should be supplied as pairs. Before dispatch, include the full OE reference on the purchase order and request a packing-list breakdown by internal item code.
Frequently Asked Questions
What should be inspected when 8U0955275E arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. For item AD02010-084, the approval should confirm the nozzle outlet is clean and unobstructed. The same item record should also confirm the internal item code before mixed stock is shelved.
Is workshop installation recommended for 8U0955275E?
Yes. A qualified workshop can access the bumper area on the Q3, transfer hoses or clips safely and test the washer system for correct operation and leaks. On the listed AUDI Q3 2016, technicians should check the system for leaks after reconnection. A workshop comparison should additionally avoid forcing a mirrored part into the bumper opening.
Are clips, hoses or fasteners supplied with 8U0955275E?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. For the left-side order line, confirm sample approval before mass shipment. The order review should further use dividers to prevent caps from rubbing each other.
How should 8U0955275E be packed for export?
The front left headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. The product-specific check for 8U0955275E should separate left and right items on the packing list. Receiving staff should also list model years and bumper versions for mixed orders.
Can product photographs alone confirm 8U0955275E compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. Before this headlight washer nozzle cover is accepted, inspect the bumper cutout shape and surrounding contour. Before approval, the buyer or technician should confirm the destination-market equipment specification.
