8U0955101A/B/C Front Left Headlight Washer Nozzle for AUDI Q3 2016
Primary OE reference: 8U0955101A/B/C
Cross-reference number 1: 8U0 955 101 A/B/C
Cross-reference number 2: 8U0955101A/B/C
Cross-reference number 3: 8U0955101ABC
Product type: Front Left Headlight Washer Nozzle
Vehicle application: AUDI Q3 2016
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: Q3
Model year: 2016
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-082
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8U0955101A/B/C Front Left Headlight Washer Nozzle Product Overview
The component shown under 8U0955101A/B/C is a front left headlight washer nozzle intended for AUDI Q3 2016. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q3
Compatibility for 8U0955101A/B/C should be confirmed against AUDI Q3 2016 and the left installation side. The review should inspect the bumper cutout shape and surrounding contour, compare the nozzle travel direction with the vehicle-side installation, and confirm that the listed model designation matches the vehicle. Use the removed part and product photographs to review body-style differences within the same model generation, check the washer jet position relative to the headlamp lens, and compare the complete OE marking with the removed washer component; finally, verify the required left or right installation side and compare the washer opening beside the correct headlamp.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-082 should be checked separately. For this headlight washer nozzle, check the fluid inlet for storage contamination, review the left-to-right mirrored geometry, and compare the cap perimeter and corner radii. A direct comparison with the removed part should additionally inspect the molded tabs for cracks or distortion, check the nozzle outlet orientation, and review the sealing area around the hose connection. Before the item is accepted, compare the support flange width and inspect the hose connector for ovality.
OE Identification and Side Confirmation
8U0955101A/B/C is the primary OE identity for this left front left headlight washer nozzle, while AD02010-082 is the internal item code. Match both references to the vehicle record, then confirm the destination-market equipment specification. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-082 begins before the bumper area is disturbed: clean the hose and connector before assembly and compare the installed height with the opposite side. During trial fitting, reconfirm the OE number before discarding the packaging, avoid forcing a mirrored part into the bumper opening, and check that the washer unit is fully seated in its guide. Before returning the vehicle to service, complete a final visual check under even lighting, test the spray direction before returning the vehicle, and paint or finish visible covers before final installation when required.
Receiving Inspection
When AD02010-082 arrives, receiving staff should inspect the fluid passage only with clean, non-damaging tools, verify that protective plugs remain in open fluid connections, and confirm that loose accessories are identified on the packing list. Before workshop release, compare the supplied side with the vehicle repair order, compare the visible surface texture with the ordered specification, record carton damage before the item is moved to workshop stock, and protect the visible face again after inspection is complete. Complete the inspection by ensuring that staff check the actuator body for straightness before trial installation, check painted or primed surfaces under neutral lighting, and match the item label to the purchase order and OE reference.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 8U0955101A/B/C |
| Cross-reference numbers | 8U0 955 101 A/B/C 8U0955101A/B/C 8U0955101ABC |
| Internal item code | AD02010-082 |
| Vehicle brand | AUDI |
| Vehicle model | Q3 |
| Model year | 2016 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI Q3 2016 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8U0955101A/B/C, please request moisture protection for sea freight, identify the required installation side, and request moisture protection for sea freight. Packing instructions should identify the required installation side, request moisture protection for sea freight, and identify the required installation side. Before dispatch, request moisture protection for sea freight and identify the required installation side.
Frequently Asked Questions
Why must left and right versions of 8U0955101A/B/C be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. For item AD02010-082, the approval should check each molded locator against the original component. The same item record should also check the bumper-facing surface for transport marks.
Can product photographs alone confirm 8U0955101A/B/C compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. On the listed AUDI Q3 2016, technicians should compare the hose connection or cover hinge with the original part. A workshop comparison should additionally confirm the destination-market equipment specification.
What information should accompany a 8U0955101A/B/C enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. For the left-side order line, confirm whether the visible cover needs a primed or finished surface. The order review should further use dividers to prevent caps from rubbing each other.
Should the washer system be tested after fitting 8U0955101A/B/C?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. The product-specific check for 8U0955101A/B/C should clean the hose and connector before assembly. Receiving staff should also reconfirm the OE number before discarding the packaging.
Are clips, hoses or fasteners supplied with 8U0955101A/B/C?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. Before this headlight washer nozzle is accepted, state the requested delivery schedule. Before approval, the buyer or technician should confirm whether the visible cover needs a primed or finished surface.
