8T0955276B Front Right Headlight Washer Nozzle Cover for AUDI A5 2013
Primary OE reference: 8T0955276B
Cross-reference number 1: 8T0 955 276B
Cross-reference number 2: 8T0955276B
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI A5 2013
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A5
Model year: 2013
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-040
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8T0955276B Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 8T0955276B is a front right headlight washer nozzle cover intended for AUDI A5 2013. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A5
Compatibility for 8T0955276B should be confirmed against AUDI A5 2013 and the right installation side. The review should verify the required left or right installation side, verify that the OE reference is not for the opposite side, and compare product photographs with the removed part from several angles. Use the removed part and product photographs to compare the washer opening beside the correct headlamp, check regional variations in headlamp-cleaning equipment, and use the full OE number, not a partial family reference; finally, compare the hose connection or cover hinge with the original part and match the connector and fluid inlet position where applicable.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-040 should be checked separately. For this headlight washer nozzle cover, check whether the visible part requires painting, inspect the molded tabs for cracks or distortion, and compare the distance between mounting points. A direct comparison with the removed part should additionally review the hose spigot angle on the washer nozzle, check the bumper-facing surface for transport marks, and inspect the telescopic body for smooth movement. Before the item is accepted, compare the support flange width and review the clip geometry on the rear face.
OE Identification and Side Confirmation
8T0955276B is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-040 is the internal item code. Match both references to the vehicle record, then compare the actuator orientation behind the bumper cover. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-040 begins before the bumper area is disturbed: retain the original fasteners unless replacements are specified and paint or finish visible covers before final installation when required. During trial fitting, test the spray direction before returning the vehicle, complete a final visual check under even lighting, and check that the washer unit is fully seated in its guide. Before returning the vehicle to service, avoid forcing a mirrored part into the bumper opening, reconfirm the OE number before discarding the packaging, and compare the installed height with the opposite side.
Receiving Inspection
When AD02010-040 arrives, receiving staff should retain the OE label until the washer system has passed its function test, inspect projecting pins before placing the item on a hard bench, and inspect the fluid passage only with clean, non-damaging tools. Before workshop release, review the hose spigot for impact damage or distortion, check painted or primed surfaces under neutral lighting, separate mirrored components immediately after carton opening, and review the production finish against the approved sample. Complete the inspection by ensuring that staff compare the supplied side with the vehicle repair order, compare left and right orientation before removing protective wrapping, and verify the supplied scope before discarding dividers or inner bags.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8T0955276B |
| Cross-reference numbers | 8T0 955 276B 8T0955276B |
| Internal item code | AD02010-040 |
| Vehicle brand | AUDI |
| Vehicle model | A5 |
| Model year | 2013 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A5 2013 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8T0955276B, please separate left and right items on the packing list, confirm sample requirements before a bulk order, and state the target vehicle application. Packing instructions should request barcode or private-label details when needed, confirm the preferred incoterm, and confirm pallet requirements for larger quantities. Before dispatch, use dividers to prevent caps from rubbing each other and state any outer-carton marking requirements.
Frequently Asked Questions
Is workshop installation recommended for 8T0955276B?
Yes. A qualified workshop can access the bumper area on the A5, transfer hoses or clips safely and test the washer system for correct operation and leaks. For item AD02010-040, the approval should check the headlamp lens receives an even spray. The same item record should also clean the hose and connector before assembly.
Can product photographs alone confirm 8T0955276B compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. On the listed AUDI A5 2013, technicians should compare the nozzle travel direction with the vehicle-side installation. A workshop comparison should additionally use the full OE number, not a partial family reference.
Does the finish specification matter for 8T0955276B?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. For the right-side order line, check the bumper-facing surface for transport marks. The order review should further check the bumper-facing surface for transport marks.
What information should accompany a 8T0955276B enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. The product-specific check for 8T0955276B should protect hose spigots and projecting tabs. Receiving staff should also separate left and right items on the packing list.
Which vehicle application is listed for 8T0955276B?
8T0955276B is listed for AUDI A5 2013. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. Before this headlight washer nozzle cover is accepted, check whether the original cover is supplied separately from its support. Before approval, the buyer or technician should check whether the original cover is supplied separately from its support.
