8T0955275B Front Left Headlight Washer Nozzle Cover for AUDI A5 2013

8T0955275B Front Left Headlight Washer Nozzle Cover Product Overview

The component shown under 8T0955275B is a front left headlight washer nozzle cover intended for AUDI A5 2013. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.

Fitment and Washer-System Application for A5

Compatibility for 8T0955275B should be confirmed against AUDI A5 2013 and the left installation side. The review should confirm the front bumper option before ordering, review facelift and pre-facelift washer layouts, and verify that the OE reference is not for the opposite side. Use the removed part and product photographs to check whether the original cover is supplied separately from its support, match the exact model year and bumper revision, and retain the removed component for a direct physical comparison; finally, match the connector and fluid inlet position where applicable and separate mirrored left and right items during inventory selection.

Headlight Washer Nozzle Cover Function and Design Notes

The visible and hidden interfaces of AD02010-039 should be checked separately. For this headlight washer nozzle cover, inspect the base bracket around every locating slot, compare the support flange width, and review the hose spigot angle on the washer nozzle. A direct comparison with the removed part should additionally check whether the visible part requires painting, inspect the hose connector for ovality, and compare the cap-to-support engagement method. Before the item is accepted, review the engagement of the cover with the nozzle stem and check the cap hinge or retaining point.

OE Identification and Side Confirmation

8T0955275B is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-039 is the internal item code. Match both references to the vehicle record, then separate mirrored left and right items during inventory selection. Do not substitute the mirrored side merely because the visible cover shape appears similar.

Installation and System Testing Guidance

Workshop preparation for AD02010-039 begins before the bumper area is disturbed: use hand pressure rather than levering narrow plastic tabs and test the spray direction before returning the vehicle. During trial fitting, photograph the original routing before disassembly, support the bumper cover while accessing the hidden actuator, and complete a final visual check under even lighting. Before returning the vehicle to service, keep dirt out of open washer-fluid lines, disconnect the fluid hose without twisting the plastic spigot, and check that the washer unit is fully seated in its guide.

Receiving Inspection

When AD02010-039 arrives, receiving staff should record carton damage before the item is moved to workshop stock, confirm the bumper-facing edge has not been compressed in transit, and verify that protective plugs remain in open fluid connections. Before workshop release, review the production finish against the approved sample, verify the nozzle head returns smoothly without applying excess force, inspect the visible cover face for scratches or pressure marks, and verify the cover contour against the approved product photograph. Complete the inspection by ensuring that staff check painted or primed surfaces under neutral lighting, photograph the received item if the vehicle fitment is still pending, and compare the visible surface texture with the ordered specification.

Product Technical Specifications

Wholesale Supply and Protective Packing

For a quotation or repeat order of 8T0955275B, please state the required order quantity, provide the complete destination address or port, and send photographs of the removed washer part. Packing instructions should include the full OE reference on the purchase order, identify the required installation side, and confirm whether the visible cover needs a primed or finished surface. Before dispatch, request protective inner wrapping for painted faces and separate left and right items on the packing list.

Frequently Asked Questions

Can 8T0955275B fit every A5 model year?

No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For item AD02010-039, the approval should verify the required left or right installation side. The same item record should also compare the actuator orientation behind the bumper cover.

Is a sample order available for 8T0955275B?

Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. On the listed AUDI A5 2013, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally provide the complete destination address or port.

Is 8T0955275B a complete headlight washer system?

No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. For the left-side order line, confirm whether the visible cover needs a primed or finished surface. The order review should further use dividers to prevent caps from rubbing each other.

Which side uses 8T0955275B?

This front left headlight washer nozzle cover is catalogued for the left side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. The product-specific check for 8T0955275B should inspect the telescopic body for smooth movement. Receiving staff should also inspect the actuator barrel for impact damage.

Can product photographs alone confirm 8T0955275B compatibility?

Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. Before this headlight washer nozzle cover is accepted, compare the hose connection or cover hinge with the original part. Before approval, the buyer or technician should compare product photographs with the removed part from several angles.