8T0955102B Front Right Headlight Washer Nozzle for AUDI A5 2009
Primary OE reference: 8T0955102B
Cross-reference number 1: 8T0 955 102B
Cross-reference number 2: 8T0955102B
Product type: Front Right Headlight Washer Nozzle
Vehicle application: AUDI A5 2009
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A5
Model year: 2009
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-042
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8T0955102B Front Right Headlight Washer Nozzle Product Overview
The component shown under 8T0955102B is a front right headlight washer nozzle intended for AUDI A5 2009. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A5
Compatibility for 8T0955102B should be confirmed against AUDI A5 2009 and the right installation side. The review should check the production date where model-year transitions overlap, check whether the original cover is supplied separately from its support, and compare the washer opening beside the correct headlamp. Use the removed part and product photographs to verify nearby parking-sensor or trim interfaces, match the exact model year and bumper revision, and inspect the bumper cutout shape and surrounding contour; finally, use the full OE number, not a partial family reference and retain the removed component for a direct physical comparison.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-042 should be checked separately. For this headlight washer nozzle, review the engagement of the cover with the nozzle stem, compare the cap-to-support engagement method, and inspect the hose connector for ovality. A direct comparison with the removed part should additionally check whether the visible part requires painting, review the hose spigot angle on the washer nozzle, and compare the support flange width. Before the item is accepted, inspect the base bracket around every locating slot and check the joint between the visible cap and hidden support.
OE Identification and Side Confirmation
8T0955102B is the primary OE identity for this right front right headlight washer nozzle, while AD02010-042 is the internal item code. Match both references to the vehicle record, then check the washer jet position relative to the headlamp lens. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-042 begins before the bumper area is disturbed: trial-fit the component before final fastening and align the cover flush with the bumper surface. During trial fitting, route the washer hose away from sharp edges, confirm that the nozzle extends and retracts freely, and check the system for leaks after reconnection. Before returning the vehicle to service, test the spray direction before returning the vehicle, avoid forcing a mirrored part into the bumper opening, and clean the hose and connector before assembly.
Receiving Inspection
When AD02010-042 arrives, receiving staff should inspect projecting pins before placing the item on a hard bench, protect the visible face again after inspection is complete, and inspect the rear locator shape without forcing any movable section. Before workshop release, retain the OE label until the washer system has passed its function test, measure the main mounting span when two bumper versions appear similar, inspect the visible cover face for scratches or pressure marks, and record carton damage before the item is moved to workshop stock. Complete the inspection by ensuring that staff check the cap hinge or retaining point for free movement, check the carton partition for evidence of part-to-part contact, and confirm the nozzle outlet is clean and unobstructed.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 8T0955102B |
| Cross-reference numbers | 8T0 955 102B 8T0955102B |
| Internal item code | AD02010-042 |
| Vehicle brand | AUDI |
| Vehicle model | A5 |
| Model year | 2009 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A5 2009 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8T0955102B, please confirm whether caps and nozzles should be supplied as pairs, confirm the preferred incoterm, and separate fragile actuator bodies from heavier metal parts. Packing instructions should verify the packed quantity by OE reference, state the required order quantity, and confirm whether the visible cover needs a primed or finished surface. Before dispatch, confirm sample requirements before a bulk order and identify project stock and service stock separately.
Frequently Asked Questions
Is workshop installation recommended for 8T0955102B?
Yes. A qualified workshop can access the bumper area on the A5, transfer hoses or clips safely and test the washer system for correct operation and leaks. For item AD02010-042, the approval should support the bumper cover while accessing the hidden actuator. The same item record should also protect the painted bumper surface during removal.
How should 8T0955102B be packed for export?
The front right headlight washer nozzle should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. On the listed AUDI A5 2009, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally use dividers to prevent caps from rubbing each other.
What should be inspected when 8T0955102B arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. For the right-side order line, review the production finish against the approved sample. The order review should further review the production finish against the approved sample.
Is 8T0955102B a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. The product-specific check for 8T0955102B should confirm sample requirements before a bulk order. Receiving staff should also state any outer-carton marking requirements.
Why must left and right versions of 8T0955102B be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. Before this headlight washer nozzle is accepted, check the complete supplied scope against the photographs. Before approval, the buyer or technician should check the bumper-facing surface for transport marks.
