8R0 945 096 Rear Bumper Light for AUDI Q5 2010 Right

8R0 945 096 Rear Bumper Light Overview

This product is listed for AUDI Q5 2010 at the right rear-bumper position. This component completes the rear bumper lighting area and must match the correct side, lens type and vehicle trim.

Production date and regional bumper specification should be reviewed when several near-identical versions are available.

For the AUDI Q5 application, compare the bumper corner radius with the product face from more than one viewing angle so left- and right-hand stock cannot be mixed during consolidation.

Physical Fitment Evidence

Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.

Check whether the bumper carries a plain reflector or an illuminated unit before approving the replacement.

For this Q5 body configuration, align each locating tab with the matching slot before applying hand pressure so the approved product can be picked consistently in a mixed wholesale order.

Before approving the Q5 part for packing, check whether the original component uses a separate retainer or an integral locking tab so hidden brackets are not loaded or bent during installation.

Surface, Seal and Electrical Interface

Confirm separately whether the removed component uses wiring, a bulb holder or an integrated LED module.

Check the lens for scratches, cracks and distortion, then compare its moulded edge with the original component.

Before fitting the right unit, verify the fastener direction and the shape of the concealed support frame to preserve access for a final electrical test where a lamp circuit is present.

While the AUDI bumper opening is accessible, protect the visible surface until the full perimeter gap has been accepted to reduce clip damage during a no-force trial installation.

Bumper Assembly Check

Check the mounting direction and side before installation; left and right components are not automatically interchangeable.

Photograph the completed fit for repeat-order records when the vehicle uses an uncommon market specification.

During comparison of the AUDI rear component, review the reflector texture and lens colour in neutral workshop light to prevent a visually similar version from sitting proud of the bumper.

For a repeat order of the right version, record the approved side and vehicle application for repeat-order identification before the packaging and carton marking are finalized.

Automotive Lighting Product Specifications

Wholesale Supply and Protective Packing

For repeat orders, quote the vehicle application and side together so the correct bumper variant is selected.

Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.

On the 2010 Q5 bumper layout, confirm that the cable exit, where fitted, clears the bumper reinforcement before inner liners make the rear attachment points difficult to inspect.

At the workshop selection stage for Q5, confirm that any connector seal remains square when the housing is fully seated so the visible gap remains even after every retaining point is engaged.

Frequently Asked Questions

Can appearance alone confirm compatibility?

No. A similar colour and outline can hide different clips, housing depth, wiring or side orientation.

Why can the same model year use another version?

Regional equipment, facelift changes and bumper trim packages can alter the opening or electrical configuration.

How should the visible lens be packed?

Keep it isolated from carton pressure, loose hardware and neighbouring products with separate support for tabs.

Can the opposite side use the same part?

Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.

How is a passive reflector checked?

Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.

Request a Product-Specific Quote

Yongshang Auto can review the pictured configuration before preparing a quantity-based offer.