8R0 807 521BA Rear Bumper Air Deflector for AUDI Q5 2013
Product: Rear Bumper Air Deflector
Primary OE: 8R0 807 521BA
Item code: AD02003-089
Cross-reference numbers:
8R0 807 521BA
8R0807521BA
Brand: AUDI
Model: Q5
Application reference: 2013 AUDI Q5
Position: Rear
Verification: Review production month, original labels, mounting edges and adjacent-panel interfaces before releasing the order.
Supply note: Provide a line-item quantity for AD02003-089 together with delivery, labelling and palletisation details.
8R0 807 521BA describes a vehicle-specific exterior service part for controlled repair-market selection. For 2013 AUDI Q5, Yongshang Auto tracks the requested rear bumper air deflector as AD02003-089.
AD02003-089 requires an application-specific review: The quotation should state whether the request concerns a complete bumper-aero component, an upper section or a lower section to avoid an incorrect comparison. The repairer should document the outcome before transferring trim components.
Compatibility Review for This Reference
Fitment guidance for 8R0 807 521BA. Compare the curve at each corner and the transition into adjacent body panels. Those areas are useful for distinguishing parts that otherwise appear alike in catalogue thumbnails. The same information helps receiving staff identify the correct carton and panel.
The rear location on 2013 AUDI Q5 should be reviewed as follows: Confirm whether the vehicle carries parking sensors, front camera equipment, headlamp washers, fog lamps, reflectors or special mouldings. Each feature can change the required holes, brackets or trim interfaces. The completed check supports a traceable discussion between buyer and supplier.
Product Technical Specifications
| Product type | Rear Bumper Air Deflector |
|---|---|
| Primary OE reference | 8R0 807 521BA |
| Cross-reference numbers | 8R0 807 521BA |
| Internal item code | AD02003-089 |
| Vehicle brand | AUDI |
| Vehicle model | Q5 |
| Model year | 2013 |
| Installation position | Rear lower bumper area |
| Applicable vehicle | 2013 AUDI Q5 |
Body-Shop Purpose of This Component
Functional context for 8R0 807 521BA. Its broad surface restores the visual continuity of the vehicle after damage. The repairer should evaluate waviness, edge condition and aperture shape during incoming inspection. This sequence keeps catalogue selection separate from cosmetic preparation.
Application note for item AD02003-089. The outer bumper-aero component contributes to styling and low-speed surface protection, but it is not a substitute for the reinforcement system. Buyers should quote each required assembly part separately. The result should be recorded before commercial release of the requested quantity.
Surface Review Before Refinishing
Receiving note for carton AD02003-089. On receipt, remove the bumper-aero component without dragging it across staples or rough carton edges. Inspect both corners, all tabs and the broad visible face under even lighting. The repairer should document the outcome before transferring trim components.
Pre-finish check for 2013 AUDI Q5. Use the supplier label, OE reference and item code to maintain traceability through receiving, sample approval and installation. The completed check supports a traceable discussion between buyer and supplier.
Data Required for a Commercial Quotation
A quotation for 8R0 807 521BA should reflect this guidance: Include the OE reference, internal item code, required quantity and destination country. Add vehicle photographs when the market version or equipment grade may affect the panel. The result should be recorded before commercial release of the requested quantity.
The 2 square images attached to AD02003-089 support visual review. Provide the purchasing contact, technical contact and delivery location. Separating commercial and fitment questions can speed up approval of the order. The buyer can then connect the physical review to the supplier item record.
Frequently Asked Questions
What makes approval more reliable for OE 8R0 807 521BA?
2013 AUDI Q5 is the stated reference for this page. Use build-month data near facelift changes. Registration year by itself may not identify the correct generation boundary. The result should be recorded before commercial release of the requested quantity.
When should the warehouse use identifier AD02003-089?
Supplier-code context for this rear bumper air deflector. For repeat supply, reference the previously accepted sample or purchase order. Do not rely only on a shortened product description when multiple variants exist. Keep AD02003-089 beside 8R0 807 521BA in the final commercial record.
Which mounting and trim interfaces matter for 8R0 807 521BA?
Panel-comparison guidance for 2013 AUDI Q5. Request a full photographic record of the removed bumper-aero part and vehicle. Include labels, side retainers, upper fixings, lower mounts and all grille or lamp openings. Those observations should remain available during sample and bulk-order review.
Why is fitment confirmation separated from cosmetic preparation?
Finishing guidance for OE 8R0 807 521BA. Use the uncoated condition to evaluate corners, upper fixings, lower mounts and trim zones before labour is committed to refinishing. That comparison gives the workshop a clearer basis for a pre-paint decision.
How should an importer prepare the enquiry for this bumper-aero component?
Wholesale request for AD02003-089. Describe inspection criteria for visible surface, tabs, openings and general contour, then state how the approved result will release production. The purchase team can use the recorded result when confirming the order line.
Request a Quote for 8R0 807 521BA
State the acceptable inspection method for surface condition, tabs, openings and general contour. Commercial approval should distinguish cosmetic review from vehicle fitment confirmation. For Yongshang Auto’s review, connect 8R0 807 521BA and AD02003-089 with the intended 2013 AUDI Q5, requested quantity and delivery market.
