8P0955102B Front Right Headlight Washer Nozzle for AUDI A3 2010-2013
Primary OE reference: 8P0955102B
Cross-reference number 1: 8P0 955 102 B
Cross-reference number 2: 8P0955102B
Product type: Front Right Headlight Washer Nozzle
Vehicle application: AUDI A3 2010-2013
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A3
Model year: 2010-2013
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-016
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8P0955102B Front Right Headlight Washer Nozzle Product Overview
The component shown under 8P0955102B is a front right headlight washer nozzle intended for AUDI A3 2010-2013. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A3
Compatibility for 8P0955102B should be confirmed against AUDI A3 2010-2013 and the right installation side. The review should compare the actuator orientation behind the bumper cover, review body-style differences within the same model generation, and review facelift and pre-facelift washer layouts. Use the removed part and product photographs to review painted, primed and unpainted finish requirements, check the washer jet position relative to the headlamp lens, and match the mounting pattern around the bumper aperture; finally, verify nearby parking-sensor or trim interfaces and compare the complete OE marking with the removed washer component.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-016 should be checked separately. For this headlight washer nozzle, check the cap hinge or retaining point, inspect the washer outlet for blockage, and compare the outer surface profile with the bumper opening. A direct comparison with the removed part should additionally review the engagement of the cover with the nozzle stem, check the nozzle outlet orientation, and inspect the actuator barrel for impact damage. Before the item is accepted, compare the cap-to-support engagement method and review the bracket stiffness and screw seats.
OE Identification and Side Confirmation
8P0955102B is the primary OE identity for this right front right headlight washer nozzle, while AD02010-016 is the internal item code. Match both references to the vehicle record, then verify the required left or right installation side. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-016 begins before the bumper area is disturbed: check the headlamp lens receives an even spray and follow the vehicle workshop procedure for bumper removal. During trial fitting, align the cover flush with the bumper surface, photograph the original routing before disassembly, and keep dirt out of open washer-fluid lines. Before returning the vehicle to service, route the washer hose away from sharp edges, inspect the bumper opening after the trial fit, and confirm sufficient clearance behind the bumper.
Receiving Inspection
When AD02010-016 arrives, receiving staff should compare connector depth and hose angle with the retained original part, verify that protective plugs remain in open fluid connections, and confirm the internal item code before mixed stock is shelved. Before workshop release, match the item label to the purchase order and OE reference, check the spring-return area where the component includes an actuator, inspect mounting holes for flash, blockage or edge damage, and compare the visible surface texture with the ordered specification. Complete the inspection by ensuring that staff check the carton partition for evidence of part-to-part contact, inspect the visible cover face for scratches or pressure marks, and inspect the rear locator shape without forcing any movable section.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 8P0955102B |
| Cross-reference numbers | 8P0 955 102 B 8P0955102B |
| Internal item code | AD02010-016 |
| Vehicle brand | AUDI |
| Vehicle model | A3 |
| Model year | 2010-2013 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A3 2010-2013 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8P0955102B, please include the full OE reference on the purchase order, request protective inner wrapping for painted faces, and protect hose spigots and projecting tabs. Packing instructions should request export-carton dimensions before freight booking, identify project stock and service stock separately, and retain the product label until fitment is confirmed. Before dispatch, request moisture protection for sea freight and separate fragile actuator bodies from heavier metal parts.
Frequently Asked Questions
Is 8P0955102B a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. For item AD02010-016, the approval should confirm the preferred incoterm. The same item record should also state the target vehicle application.
Why must left and right versions of 8P0955102B be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. On the listed AUDI A3 2010-2013, technicians should inspect the actuator barrel for impact damage. A workshop comparison should additionally inspect the actuator barrel for impact damage.
Are clips, hoses or fasteners supplied with 8P0955102B?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. For the right-side order line, confirm sample approval before mass shipment. The order review should further use dividers to prevent caps from rubbing each other.
Does the finish specification matter for 8P0955102B?
Yes. A visible headlight washer nozzle may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. The product-specific check for 8P0955102B should compare the distance between mounting points. Receiving staff should also compare the visible bumper-side contour.
Which vehicle application is listed for 8P0955102B?
8P0955102B is listed for AUDI A3 2010-2013. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. Before this headlight washer nozzle is accepted, check whether the original cover is supplied separately from its support. Before approval, the buyer or technician should check whether the original cover is supplied separately from its support.
