8P0 823 433 A Hood Buffer Rubber Seal for 2009 AUDI A4
Primary OE reference: 8P0 823 433 A
Cross-reference 1: 8P0 823 433 A
Product type: Hood Buffer Rubber Seal
Applicable vehicle: 2009 AUDI A4
Installation position: Hood Buffer Contact Area
Brand: AUDI
Model: A4
Vehicle year: 2009
Product form: Molded elastomer buffer for a defined hood contact point
Product identification: Catalog approval should reconcile the buffer’s contact face, mounting base and working height with the original hood support point.
Functional purpose: Provides controlled rubber compression at the hood support point to reduce rattle and protect adjoining panel surfaces.
Fitment confirmation: Match the mounting base and working height, then confirm that the hood sits level without excessive preload after installation.
Receiving inspection: Check the rubber contact face for cuts or permanent compression and keep small parts identified by OE label until fitted.
Wholesale enquiry: State unit quantity and bag-label requirements to keep small hood buffers traceable in warehouse handling.
8P0 823 433 A Hood Buffer Rubber Seal Overview
OE 8P0 823 433 A identifies a molded hood-buffer component listed for the 2009 AUDI A4 application in this catalog. The part should be checked by its base shape, locating feature and installed contact height.
Hood Closing Cushion and Contact-Point Control
A hood buffer supports the closed panel at a controlled point, helping reduce rattle and preventing hard contact between adjacent structures. The rubber profile must compress predictably without holding the hood too high.
OE Reference and Application Verification
Compare 8P0 823 433 A with the removed buffer and inspect the mounting opening, lower engagement shape and upper contact face. Hood adjustment problems should be diagnosed separately before replacing the component.
Product Specifications
| Product type | Hood Buffer Rubber Seal |
|---|---|
| Primary OE reference | 8P0 823 433 A |
| Internal item code | AD02030-001 |
| Vehicle brand | AUDI |
| Model | A4 |
| Vehicle year | 2009 |
| Application | 2009 AUDI A4 |
| Installation position | Hood Buffer Contact Area |
| Product form | Molded elastomer buffer for a defined hood contact point |
| Cross-reference numbers | 8P0 823 433 A |
Handling and Installation Guidance
Clean the mounting area and install the buffer without lubricants that may attack rubber. Close the hood gently, check panel height on both sides and adjust only through the vehicle’s approved method.
Wholesale and Distributor Supply
Purchasing teams can request quotation for 8P0 823 433 A by providing unit quantity, destination and packaging format. Small molded parts should be bagged and labeled by OE number to avoid warehouse mixing.
Frequently Asked Questions
How can buyers confirm 8P0 823 433 A fits the vehicle?
Compare the lower engagement shape and upper contact face with the removed buffer, then verify the resulting hood height.
What is the function of 8P0 823 433 A?
The rubber element supports the closed hood at a defined point, helping control movement and preventing hard surface-to-surface contact.
Is 8P0 823 433 A a universal replacement?
Use the complete suffix and verify the mounting interface; a buffer with similar diameter may have a different engagement depth or compression height.
What should be inspected before installing 8P0 823 433 A?
Check the mounting opening, panel alignment and condition of the mating surface. Do not use excessive compression to correct an unrelated hood adjustment issue.
What information is needed for a wholesale quote on 8P0 823 433 A?
Quote the OE number with unit quantity, destination and individual-bag or bulk-pack requirements.
