8K0955276C Front Right Headlight Washer Nozzle Cover for AUDI A4 2013
Primary OE reference: 8K0955276C
Cross-reference number 1: 8K0 955 276C
Cross-reference number 2: 8K0955276C
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI A4 2013
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A4
Model year: 2013
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-028
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8K0955276C Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 8K0955276C is a front right headlight washer nozzle cover intended for AUDI A4 2013. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A4
Compatibility for 8K0955276C should be confirmed against AUDI A4 2013 and the right installation side. The review should confirm the destination-market equipment specification, review body-style differences within the same model generation, and retain the removed component for a direct physical comparison. Use the removed part and product photographs to use the full OE number, not a partial family reference, inspect the bumper cutout shape and surrounding contour, and match the exact model year and bumper revision; finally, verify nearby parking-sensor or trim interfaces and compare the washer opening beside the correct headlamp.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-028 should be checked separately. For this headlight washer nozzle cover, check each molded locator against the original component, review the sealing area around the hose connection, and compare the outer surface profile with the bumper opening. A direct comparison with the removed part should additionally inspect the hose connector for ovality, check the bumper-facing surface for transport marks, and review the spring-loaded return features where fitted. Before the item is accepted, compare the visible bumper-side contour and inspect the actuator barrel for impact damage.
OE Identification and Side Confirmation
8K0955276C is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-028 is the internal item code. Match both references to the vehicle record, then confirm that the listed model designation matches the vehicle. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-028 begins before the bumper area is disturbed: test the spray direction before returning the vehicle and replace distorted clips or damaged seals. During trial fitting, tighten bracket hardware only after alignment, confirm sufficient clearance behind the bumper, and check that the washer unit is fully seated in its guide. Before returning the vehicle to service, use hand pressure rather than levering narrow plastic tabs, check the headlamp lens receives an even spray, and confirm that no hose is pinched behind the bumper.
Receiving Inspection
When AD02010-028 arrives, receiving staff should document any shortage before the receiving inspection is closed, verify the cover contour against the approved product photograph, and retain the OE label until the washer system has passed its function test. Before workshop release, check the carton partition for evidence of part-to-part contact, compare left and right orientation before removing protective wrapping, photograph the received item if the vehicle fitment is still pending, and confirm the internal item code before mixed stock is shelved. Complete the inspection by ensuring that staff review the hose spigot for impact damage or distortion, confirm the bumper-facing edge has not been compressed in transit, and measure the main mounting span when two bumper versions appear similar.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8K0955276C |
| Cross-reference numbers | 8K0 955 276C 8K0955276C |
| Internal item code | AD02010-028 |
| Vehicle brand | AUDI |
| Vehicle model | A4 |
| Model year | 2013 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A4 2013 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8K0955276C, please confirm the preferred incoterm, request a packing-list breakdown by internal item code, and protect each nozzle outlet from dust during transit. Packing instructions should request protective inner wrapping for painted faces, state the target vehicle application, and provide the consignee and freight-forwarder details. Before dispatch, confirm sample approval before mass shipment and state the required order quantity.
Frequently Asked Questions
Which vehicle application is listed for 8K0955276C?
8K0955276C is listed for AUDI A4 2013. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. For item AD02010-028, the approval should compare the actuator orientation behind the bumper cover. The same item record should also confirm that the vehicle is equipped with a factory headlight washer system.
Are clips, hoses or fasteners supplied with 8K0955276C?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. On the listed AUDI A4 2013, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally check carton labels at receiving.
Should the washer system be tested after fitting 8K0955276C?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. For the right-side order line, retain the original fasteners unless replacements are specified. The order review should further verify that the cover closes without rubbing the bumper.
How should 8K0955276C be packed for export?
The front right headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. The product-specific check for 8K0955276C should confirm whether the visible cover needs a primed or finished surface. Receiving staff should also separate left and right items on the packing list.
Is 8K0955276C a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. Before this headlight washer nozzle cover is accepted, state the requested delivery schedule. Before approval, the buyer or technician should verify the packed quantity by OE reference.
