8K0955276 Front Right Headlight Washer Nozzle Cover for AUDI A4 2009
Primary OE reference: 8K0955276
Cross-reference number 1: 8K0 955 276
Cross-reference number 2: 8K0955276
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI A4 2009
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A4
Model year: 2009
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-032
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8K0955276 Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 8K0955276 is a front right headlight washer nozzle cover intended for AUDI A4 2009. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A4
Compatibility for 8K0955276 should be confirmed against AUDI A4 2009 and the right installation side. The review should review facelift and pre-facelift washer layouts, match the mounting pattern around the bumper aperture, and retain the removed component for a direct physical comparison. Use the removed part and product photographs to verify that the OE reference is not for the opposite side, check regional variations in headlamp-cleaning equipment, and match the connector and fluid inlet position where applicable; finally, check whether the original cover is supplied separately from its support and confirm the front bumper option before ordering.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-032 should be checked separately. For this headlight washer nozzle cover, check the bumper-facing surface for transport marks, review the bracket stiffness and screw seats, and compare the visible bumper-side contour. A direct comparison with the removed part should additionally inspect the base bracket around every locating slot, check whether the visible part requires painting, and review the engagement of the cover with the nozzle stem. Before the item is accepted, compare the retracted position with the bumper surface and inspect the telescopic body for smooth movement.
OE Identification and Side Confirmation
8K0955276 is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-032 is the internal item code. Match both references to the vehicle record, then check regional variations in headlamp-cleaning equipment. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-032 begins before the bumper area is disturbed: transfer reusable clips only after checking their condition and verify that the cap remains attached through a full washer cycle. During trial fitting, verify that the cover closes without rubbing the bumper, disconnect the fluid hose without twisting the plastic spigot, and support the bumper cover while accessing the hidden actuator. Before returning the vehicle to service, use hand pressure rather than levering narrow plastic tabs, protect the painted bumper surface during removal, and replace distorted clips or damaged seals.
Receiving Inspection
When AD02010-032 arrives, receiving staff should confirm that small seals or clips have not remained in the wrapping, verify the supplied scope before discarding dividers or inner bags, and inspect the visible cover face for scratches or pressure marks. Before workshop release, inspect projecting pins before placing the item on a hard bench, compare connector depth and hose angle with the retained original part, check molded tabs for whitening, cracks or transport stress, and review the production finish against the approved sample. Complete the inspection by ensuring that staff inspect mounting holes for flash, blockage or edge damage, confirm the nozzle outlet is clean and unobstructed, and measure the main mounting span when two bumper versions appear similar.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8K0955276 |
| Cross-reference numbers | 8K0 955 276 8K0955276 |
| Internal item code | AD02010-032 |
| Vehicle brand | AUDI |
| Vehicle model | A4 |
| Model year | 2009 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A4 2009 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8K0955276, please state the target vehicle application, request replacement-part documentation when required, and state the target vehicle application. Packing instructions should request replacement-part documentation when required, state the target vehicle application, and request replacement-part documentation when required. Before dispatch, state the target vehicle application and request replacement-part documentation when required.
Frequently Asked Questions
Why must left and right versions of 8K0955276 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. For item AD02010-032, the approval should compare the distance between mounting points. The same item record should also check the complete supplied scope against the photographs.
Is a sample order available for 8K0955276?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. On the listed AUDI A4 2009, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally confirm sample approval before mass shipment.
Which side uses 8K0955276?
This front right headlight washer nozzle cover is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. For the right-side order line, check the fluid inlet for storage contamination. The order review should further compare the distance between mounting points.
Is workshop installation recommended for 8K0955276?
Yes. A qualified workshop can access the bumper area on the A4, transfer hoses or clips safely and test the washer system for correct operation and leaks. The product-specific check for 8K0955276 should clean the hose and connector before assembly. Receiving staff should also inspect the bumper opening after the trial fit.
What should be inspected when 8K0955276 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. Before this headlight washer nozzle cover is accepted, check the cap hinge or retaining point for free movement. Before approval, the buyer or technician should inspect the visible cover face for scratches or pressure marks.
