8EW351040291 Blower Motor for MERCEDES-BENZ
Primary OE reference: 8EW351040291
Cross-reference 1: A2048200108
Cross-reference 2: A2048200908
Cross-reference 3: KM3736
Cross-reference 4: MS8630
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MERCEDES-BENZ
Brand: MERCEDES-BENZ
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
8EW351040291 Automotive Blower Motor Overview
This listing links 8EW351040291 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6232-052, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6232-052 when comparing this 8EW351040291 airflow configuration.
OE Reference and Application
The primary catalogue number is 8EW351040291. The recorded application is MERCEDES-BENZ. For 6232-052, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6232-052 with the approved OE reference.
HVAC Interface and 8EW351040291 installation
During work on 6232-052, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 8EW351040291 installation. Recheck 6232-052 before the lower trim is closed.
For item 6232-052, confirm that the 8EW351040291 centrifugal wheel clears its housing and that the 6232-052 connector lock engages without force. After seating 6232-052, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6232-052.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 8EW351040291 |
| Cross-reference numbers | A2048200108 / A2048200908 / KM3736 / MS8630 |
| Vehicle brand | MERCEDES-BENZ |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 8EW351040291 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6232-052, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6232-052 record remains the picking reference.
For trade item 6232-052, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6232-052 on the packing instruction.
Frequently Asked Questions
How should item 6232-052 and blower number 8EW351040291 be verified?
Match 6232-052 to the complete 8EW351040291 marking, then compare the 6232-052 plug, terminal count, mounting flange and wheel dimensions with the removed MERCEDES-BENZ unit.
Can 6232-052 have more than one vehicle-side blower configuration?
Yes. MERCEDES-BENZ production changes can affect 6232-052; confirm steering position, climate-control specification and the original 6232-052 geometry before approval.
What circuit checks are useful when 6232-052 does not operate?
For 6232-052, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6232-052 motor again.
Which details should accompany a wholesale request for 6232-052?
Provide item 6232-052, OE 8EW351040291, the stated application, quantity and destination; add 6232-052 carton or private-label requirements separately.
How can noise be avoided after fitting 6232-052?
Clear debris from the air inlet, check that the 6232-052 wheel turns freely, seat the 6232-052 flange evenly and keep wiring away from the impeller.
Request a quote for 6232-052: Send 8EW351040291, the 6232-052 application and required quantity for a fitment and supply review.
