8E0-803-899B Spare Wheel Hold-Down Bolt for 2005 Audi A6
Primary OE reference: 8E0 803 899B
Cross-reference 1: 8E0 803 899B
Product type: Spare Wheel Hold-Down Bolt
Applicable vehicle: 2005 AUDI A6
Installation position: Centre of the spare-wheel well
Brand: AUDI
Model: A6
Vehicle year: 2005
Identification detail: long threaded hold-down fastener with moulded hand grip
Fitment basis: Match 8E0 803 899B, thread or hole size, shoulder length and contact surface.
Installation guidance: Start the fastener by hand and apply the vehicle maker’s specified tightening method.
Purchase reference: Quote SKU AD02042-002, OE number, vehicle application and quantity.
8E0 803 899B Spare Wheel Hold-Down Bolt Overview
For 2005 AUDI A6, reference 8E0 803 899B identifies this spare wheel hold-down bolt. The extended stem passes through the wheel centre and clamps it to the luggage-floor mounting point.
Product-Specific Fitment
Use the product photographs to compare long threaded hold-down fastener with moulded hand grip. Inspect the mating stud, bracket or body opening because a similar-looking fastener may have a different pitch, shoulder or locating depth.
Workshop Installation Method
Clean the mating thread and start 8E0 803 899B without power tools. If resistance is felt before seating, stop and check pitch alignment; cross-threading can damage the retained component.
Functional Check After Assembly
After fitting, check that the supported component remains stable through its normal movement and temperature range. Recheck access for later service and verify nearby hoses or wiring are not pinched.
Warehouse Identification
Store SKU AD02042-002 under 8E0 803 899B with the AUDI A6 application and centre of the spare-wheel well recorded on the bin label. Keep small threaded pieces bagged separately; protect formed brackets from stacking loads that could change their geometry.
Hold-Down Stem Length
The B-suffix design uses a defined threaded reach to bridge the wheel centre and floor anchor. Measure the removed stem from the pressure face to the thread start, and confirm the hand grip clears the luggage-floor panel when the wheel is secured.
Automotive Replacement Part Specifications
| Product type | Spare Wheel Hold-Down Bolt |
|---|---|
| Primary OE reference | 8E0 803 899B |
| Internal item code | AD02042-002 |
| Vehicle brand | AUDI |
| Model | A6 |
| Vehicle year | 2005 |
| Applicable vehicle | 2005 AUDI A6 |
| Installation position | Centre of the spare-wheel well |
| Identification detail | long threaded hold-down fastener with moulded hand grip |
| Cross-reference numbers | 8E0 803 899B |
Packing and Trade Supply
Protect threads and exposed locating ends with sleeves or caps. Pack SKU AD02042-002 so finished faces and bracket bends cannot rub against loose hardware in transit.
Frequently Asked Questions
What does 8E0 803 899B identify?
8E0 803 899B identifies the stated spare wheel hold-down bolt for 2005 AUDI A6.
Which features should be compared for AD02042-002?
Check long threaded hold-down fastener with moulded hand grip, then verify every thread, shoulder, hole and contact face.
Can a similar fastener be substituted?
Only after confirming dimensions, material function and the load carried by the mounting point.
What installation practice is recommended?
Start by hand and use the manufacturer-specified torque and sequence.
What information is required for wholesale supply?
Provide 8E0 803 899B, SKU AD02042-002, vehicle details, destination and order quantity.
