8972119520 Blower Motor for NISSAN
Primary OE reference: 8972119520
Cross-reference 1: 522725-0596
Cross-reference 2: NS-B5201A
Cross-reference 3: 0486
Cross-reference 4: 502725-0586
Cross-reference 5: AD-IS05
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN
Brand: NISSAN
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
8972119520 Automotive Blower Motor Overview
Reference 8972119520 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6205-080, the 8972119520 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-080 when comparing this 8972119520 airflow configuration.
OE Reference and Application
The primary catalogue number is 8972119520. The recorded application is NISSAN. For 6205-080, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6205-080 with the approved OE reference.
HVAC Interface and 8972119520 installation
During work on 6205-080, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-080 before the lower trim is closed.
For item 6205-080, confirm that the 8972119520 centrifugal wheel clears its housing and that the 6205-080 connector lock engages without force. After seating 6205-080, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-080.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 8972119520 |
| Cross-reference numbers | 522725-0596 / NS-B5201A / 0486 / 502725-0586 / AD-IS05 |
| Vehicle brand | NISSAN |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 8972119520 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-080, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-080 record remains the picking reference.
For trade item 6205-080, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6205-080 on the packing instruction.
Frequently Asked Questions
How should item 6205-080 and blower number 8972119520 be verified?
Match 6205-080 to the complete 8972119520 marking, then compare the 6205-080 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-080 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-080; confirm steering position, climate-control specification and the original 6205-080 geometry before approval.
What circuit checks are useful when 6205-080 does not operate?
For 6205-080, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-080 motor again.
Which details should accompany a wholesale request for 6205-080?
Provide item 6205-080, OE 8972119520, the stated application, quantity and destination; add 6205-080 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-080?
Clear debris from the air inlet, check that the 6205-080 wheel turns freely, seat the 6205-080 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-080: Send 8972119520, the 6205-080 application and required quantity for a fitment and supply review.
